Orbit Manufacturing ORBIT-6 RP-206 Periodic Test Time Location, Reporting Codes for Alarm Events

Page 27

System Controls:

1ST Digit

System Controls:

2nd Digit

PERIODIC TEST TIME: LOCATION 31

If desired, the ORBIT-6 can send a daily test transmission to the Central Station to verify the operation of the unit’s Digital Communicator.

Location: 31

Periodic Test Time

Default: 0000

Sets a fixed, daily time for sending an ORBIT-6 test transmission to the Central Station. The

chosen time is expressed in 24-Hour format (following examples):

 

8:30 AM=0830

11:15AM=1115

4:30 PM=1630

Periodic

If desired, disable the test transmission capability by

Test Time

accepting (or entering) the default (0000)

 

Note: Failure to set the systems’ time clock, will prevent the code from being sent to the Central Station.

COMMUNICATOR REPORTING CODES: LOCATIONS 32 THROUGH 86

To program the codes that will be transmitted by the ORBIT-6 to the Central Station.

To prevent the corresponding event from being reported, use a “double-zero” (00, the default) in the location.

Reporting Codes for Alarm Events:

Location

Description

Digits

Default

Report Code

 

 

 

 

 

32

Zone 1 Alarm Reporting code

2

00

 

33

Zone 2 Alarm Reporting code

2

00

 

34

Zone 3 Alarm Reporting code

2

00

 

35

Zone 4 Alarm Reporting code

2

00

 

36

Zone 5 Alarm Reporting code

2

00

 

37

Zone 6 Alarm Reporting code

2

00

 

38

Zone 7 Alarm Reporting code

2

00

 

39

Zone 8 Alarm Reporting code

2

00

 

40

Keypad Fire Alarms Reporting code

2

00

 

41

Keypad Panic Reporting code

2

00

 

42

Keypad Special Emergency Reporting code

2

00

 

Notes on Alarm Restorals

An ORBIT-6 Restoral Report informs the Central Station that the external sounder’s operation, initially triggered by the respective alarm condition, has either “timed out” or been silenced by the act of system disarming. Be sure to check with Central Station personnel if restorals are permitted and, if so, what codes are required.

Restoral Codes

Location

Description

Digits

Default

Report Code

 

 

 

 

 

43

Zone 1 Restoral Code

2

00

 

44

Zone 2 Restoral Code

2

00

 

45

Zone 3 Restoral Code

2

00

 

46

Zone 4 Restoral Code

2

00

 

47

Zone 5 Restoral Code

2

00

 

48

Zone 6 Restoral Code

2

00

 

49

Zone 7 Restoral Code

2

00

 

50

Zone 8 Restoral Code

2

00

 

51

Keypad Fire Restoral Code

2

00

 

52

Keypad panic Restoral Code

2

00

 

53

Keypad Special Emergency Restoral Code

2

00

 

Installer Manual

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Installer Manual VER. B Customer Information For service centers please see back cover5IN206IM B Maintenance On/Off Buzzer Silencing an AlarmReset Smoke Detectors Display Troubles Display Memory Setting/ChangingTable of Contents Introduction to the ORBIT-6 Main FeaturesBefore You Begin InstallationMain Panel Technical DataIntroduction to Programming Restoring Factory Defaults to the ORBIT-6Installer Programming KeypadOrbit Programmer Programming your Orbit-6Hexadecimal Digits Viewing the Contents of a LocationProgramming Tutorial Locations Whose Contents Occupy More Than One DigitAudible Tones and Error Beeps How to program installer parametersInstaller Code InstallerMode Access Press 0, 8, ARM Current Installer CodeLocation Default Enable Def General System Parameters LocationsLocation 01 MS Lock Def System Codes Locations Intrusion Zone Types and Zone Sounds Locations System Time LocationsFire Zone Interior + Entry Delay FollowerKey-switch Zone Instant Key-switch Zone DelayedSpecial Zone Types Location 19 Zone 6 Tamper Zone Utility Outputs LocationsZone 1 Alarm Follow Pulsed Alarm Follow LatchedAlarm Follow Pulse Zone 1 Alarm Follow LatchedVoice Module Enable AUX Power Switch FireLow Battery Follow Latched Low Battery Follow PulseCommunication Parameters Locations Digital Communicator Controls LocationCentral Station Protocols Location Location Dialer Controls 2nd Digit AttemptsFormat Name Understanding the Code Format Location CS Protocols 1 st Digit St Digit FormatLocation CS Protocols 2 nd Digit Nd Digit Data Rate Upload/Download Rings Location System Controls LocationComments on System Controls Location 30 1st Digit Location System Controls 2 nd Digit Nd Digit Silent Panic Bell Squawk on Arming Minute Bypass EnabledComments on System Controls Location 30 2nd Digit Location System Controls 1st Digit St DigitCommunicator Reporting Codes Locations 32 Through Reporting Codes for Alarm EventsLocation Periodic Test Time Default Periodic Test Time LocationTrouble Reports and Restorals Other Reporting CodesLocation Description Entry ORBIT-6 Installer Programming WorksheetCode Program Digit Zones Alarms/DisarmZones Alarms/Disarm Program Digit Code Event Reporting Contact IDAccess SpecialTroubles ORBIT-6 Wiring Diagram ORBIT-6 Wiring Diagram Zone Keypad Board Installer Manual Installer Manual Rokonet Limited Warranty

ORBIT-6 RP-206 specifications

Orbit Manufacturing's ORBIT-6 RP-206 is a state-of-the-art device designed to meet the evolving demands of modern manufacturing processes. Known for its reliability and versatility, the ORBIT-6 RP-206 integrates advanced technologies that enhance operational efficiency and productivity across various industrial applications.

One of the main features of the ORBIT-6 RP-206 is its robust construction, which ensures durability even in the most demanding environments. Built from high-grade materials, this equipment is designed to withstand wear and tear, thus reducing maintenance costs and downtime. The incorporation of a high-performance motor allows for improved power efficiency and faster processing speeds, enabling manufacturers to increase their output without sacrificing quality.

The ORBIT-6 RP-206 utilizes cutting-edge automation technologies. Equipped with a user-friendly interface, it allows for seamless integration into existing manufacturing systems. This system includes programmable features that enable users to customize operations according to their specific requirements. This flexibility makes it an ideal choice for small to medium-sized businesses as well as large-scale manufacturing facilities.

Moreover, one of the standout characteristics of the ORBIT-6 RP-206 is its advanced data analytics capabilities. By leveraging real-time data, manufacturers can continuously monitor performance metrics, allowing for proactive decision-making and process optimization. This feature not only enhances productivity but also contributes to quality control by identifying any deviations or anomalies during production.

Safety is another paramount concern for Orbit Manufacturing. The ORBIT-6 RP-206 incorporates various safety mechanisms, including automatic shut-off systems and emergency stops, ensuring a secure working environment for operators. Additionally, the machine is designed with easy access to key components for maintenance, further reinforcing its commitment to user safety and convenience.

In terms of environmental considerations, the ORBIT-6 RP-206 is engineered to minimize energy consumption and reduce waste. This eco-friendly approach resonates with the growing trend towards sustainable manufacturing practices, ensuring that businesses can meet their environmental goals while maintaining operational efficiency.

In conclusion, Orbit Manufacturing's ORBIT-6 RP-206 stands out as a technologically advanced solution for the modern manufacturing landscape. With its robust construction, automation capabilities, data analytics, safety features, and environmental consciousness, it is poised to deliver exceptional performance, making it an invaluable asset for any manufacturing operation.
Top Page Image Contents