Orbit Manufacturing ORBIT-6 RP-206 manual Main Features, Introduction to the ORBIT-6

INTRODUCTION TO THE ORBIT-6

The ORBIT-6is intended to address the needs of many homes, offices, and small businesses. Its operation is designed around microprocessor and EEPROM (Electrically Erasable Programmable Read-Only Memory) technology, which stores, without the need for a source of power, the system’s operating program and its programmable parameters.

System programming may be performed from any ORBIT-6keypad, or from a special LCD Programming Keypad designed specifically for that.

Remote and local system programming is also possible through the use of Rokonet’s ORBIT Upload/Download software.

Main Features:

Zones (end-of-line resistor required 2200 ohm)

∙6 Programmable Intrusion Zones

∙Special type: Zone 5 – Fire Zone, Zone 6 - tamper zone

∙One Fixed Panic Zone input on the keypad (not on keypad RP206KL6)

∙3 Keypad Emergency Zones (Panic, Fire, Special Emergency)

Alarm Sounder Output

∙Programmable Bell/Siren or Loudspeaker Output

∙Capacity: 750 mA (maximum)

Auxiliary Output for Peripheral Devices

∙Capacity 250 mA (maximum)

Built-In Digital Communicator

∙For Central Station communications (two phone numbers)

∙For Upload/Download functions

∙For follow-me functions

Keypads

∙Up to 4 LED/LCD keypads can be connected

Utility Outputs

∙One transistor-driven (open-collector) triggered output

Security Codes

∙Two Installer Codes

∙One Master (User) Code

∙Nine User Codes (all may be used as duress code)

Periodic Testing

∙Daily test report to central station

Optional Peripherals

∙Four relay outputs expansion

∙Voice Module

Event Log

∙Event log of 100 events

6

Installer Manual