Orbit Manufacturing ORBIT-6 RP-206 manual Digit Event and Result Not Active, Arm Follow Latch

Page 20

Digit Event and Result

00Not Active

(default) UO offers no response to any system activity

Arm Follow (Latch)

01U0 is activated when the system is armed. The activation occurs after the expiration of the exit/delay period. The U0 remains active (latched) while the system is armed. When disarming the system the U0 deactivates (unlatches).

 

Arm Follow (Pulse)

02

UO is activated when the system is armed. The activation occurs after the expiration of

the exit/delay period. The UO is activated for several seconds (pulse), after which is

 

 

deactivated.

Alarm Follow (Latched)

UO is immediately activated when the system goes into any type of alarm (i.e. intrusion,

03 fire, keypad-initiated panic) UO remains active (latched) for the duration of the alarm-even after the system’s sounder “times out” UO is deactivated when the system is disarmed

04

Alarm Follow (Pulse)

UO is immediately activated for several seconds and then deactivated whenever the

 

system goes into any type of alarm (i.e. intrusion, fire, keypad-initiated panic)

 

Zone 1 Alarm Follow (Latched)

05

U0 is immediately activated when an alarm occurs on Zone 1. U0 remains active

(latched) for the duration of the alarm - even after the system sounder "times out". U0 is

 

 

deactivated when Zone 1 goes into normal condition.

06

Zone 1 Alarm Follow (Pulsed)

U0 is immediately activated for several seconds (pulsed) and then deactivates whenever

 

Zone 1 goes into alarm.

07

Zone 2 Alarm Follow (Latched)

08

Zone 2 Alarm Follow (Pulsed)

09

Zone 3 Alarm Follow (Latched)

0A

Zone 3 Alarm Follow (Pulsed)

0B

Zone 4 Alarm Follow (Latched)

0C

Zone 4 Alarm Follow (Pulsed)

0D

Zone 5 Alarm Follow (Latched)

0E

Zone 5 Alarm Follow (Pulsed)

0F

Zone 6 Alarm Follow (Latched)

10

Zone 6 Alarm Follow (Pulsed)

11

Zone 7 Alarm Follow (Latched)

12

Zone 7 Alarm Follow (Pulsed)

13

Zone 8 Alarm Follow (Latched)

14

Zone 8 Alarm Follow (Pulsed)

 

Panic Follow (Latched)

15UO is activated immediately when a PANIC alarm is triggered by a violation of a zone, defined as Panic, or by pressing the keypad’s [1] and [2] keys simultaneously for two seconds. U0 is deactivated when the system is disarmed.

Panic Follow (Pulse)

16UO is activated for several seconds when a PANIC alarm is triggered by a violation of a zone, defined as Panic, or by pressing the keypad’s [1] and [2] keys simultaneously for two seconds.

20

Installer Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Installer Manual VER. B For service centers please see back cover Customer Information5IN206IM B Silencing an Alarm Reset Smoke DetectorsDisplay Troubles Display Memory Setting/Changing Maintenance On/Off BuzzerTable of Contents Main Features Introduction to the ORBIT-6Installation Before You BeginTechnical Data Main PanelRestoring Factory Defaults to the ORBIT-6 Installer ProgrammingKeypad Introduction to ProgrammingProgramming your Orbit-6 Orbit ProgrammerViewing the Contents of a Location Hexadecimal DigitsLocations Whose Contents Occupy More Than One Digit Audible Tones and Error BeepsHow to program installer parameters Programming TutorialInstaller Mode Access Press 0, 8, ARMCurrent Installer Code Installer CodeLocation 01 MS Lock Def Location Default Enable DefGeneral System Parameters Locations System Codes Locations System Time Locations Intrusion Zone Types and Zone Sounds LocationsInterior + Entry Delay Follower Key-switch Zone InstantKey-switch Zone Delayed Fire ZoneSpecial Zone Types Utility Outputs Locations Location 19 Zone 6 Tamper ZoneAlarm Follow Latched Alarm Follow PulseZone 1 Alarm Follow Latched Zone 1 Alarm Follow PulsedAUX Power Switch Fire Low Battery Follow LatchedLow Battery Follow Pulse Voice Module EnableDigital Communicator Controls Location Communication Parameters LocationsFormat Name Central Station Protocols LocationLocation Dialer Controls 2nd Digit Attempts Location CS Protocols 2 nd Digit Nd Digit Data Rate Understanding the Code FormatLocation CS Protocols 1 st Digit St Digit Format Comments on System Controls Location 30 1st Digit Upload/Download Rings LocationSystem Controls Location Silent Panic Bell Squawk on Arming Minute Bypass Enabled Comments on System Controls Location 30 2nd DigitLocation System Controls 1st Digit St Digit Location System Controls 2 nd Digit Nd DigitReporting Codes for Alarm Events Location Periodic Test Time DefaultPeriodic Test Time Location Communicator Reporting Codes Locations 32 ThroughOther Reporting Codes Trouble Reports and RestoralsORBIT-6 Installer Programming Worksheet Location Description EntryZones Alarms/Disarm Zones Alarms/Disarm Program Digit CodeEvent Reporting Contact ID Code Program DigitTroubles AccessSpecial ORBIT-6 Wiring Diagram ORBIT-6 Wiring Diagram Zone Keypad Board Installer Manual Installer Manual Rokonet Limited Warranty

ORBIT-6 RP-206 specifications

Orbit Manufacturing's ORBIT-6 RP-206 is a state-of-the-art device designed to meet the evolving demands of modern manufacturing processes. Known for its reliability and versatility, the ORBIT-6 RP-206 integrates advanced technologies that enhance operational efficiency and productivity across various industrial applications.

One of the main features of the ORBIT-6 RP-206 is its robust construction, which ensures durability even in the most demanding environments. Built from high-grade materials, this equipment is designed to withstand wear and tear, thus reducing maintenance costs and downtime. The incorporation of a high-performance motor allows for improved power efficiency and faster processing speeds, enabling manufacturers to increase their output without sacrificing quality.

The ORBIT-6 RP-206 utilizes cutting-edge automation technologies. Equipped with a user-friendly interface, it allows for seamless integration into existing manufacturing systems. This system includes programmable features that enable users to customize operations according to their specific requirements. This flexibility makes it an ideal choice for small to medium-sized businesses as well as large-scale manufacturing facilities.

Moreover, one of the standout characteristics of the ORBIT-6 RP-206 is its advanced data analytics capabilities. By leveraging real-time data, manufacturers can continuously monitor performance metrics, allowing for proactive decision-making and process optimization. This feature not only enhances productivity but also contributes to quality control by identifying any deviations or anomalies during production.

Safety is another paramount concern for Orbit Manufacturing. The ORBIT-6 RP-206 incorporates various safety mechanisms, including automatic shut-off systems and emergency stops, ensuring a secure working environment for operators. Additionally, the machine is designed with easy access to key components for maintenance, further reinforcing its commitment to user safety and convenience.

In terms of environmental considerations, the ORBIT-6 RP-206 is engineered to minimize energy consumption and reduce waste. This eco-friendly approach resonates with the growing trend towards sustainable manufacturing practices, ensuring that businesses can meet their environmental goals while maintaining operational efficiency.

In conclusion, Orbit Manufacturing's ORBIT-6 RP-206 stands out as a technologically advanced solution for the modern manufacturing landscape. With its robust construction, automation capabilities, data analytics, safety features, and environmental consciousness, it is poised to deliver exceptional performance, making it an invaluable asset for any manufacturing operation.
Top Page Image Contents