Ciprico 6500 manual Enter a New Password, Enter a new password as follows Press the down arrow

	Chapter	Display/Operation Panel
Page 3 - 12		ARRAY OPTIONS
PASSWORD The password option allows you to set or clear the array's password protection
	feature. When set, the password is a user-entered series of four display/
	operation panel keystrokes—any key can be used	except the RESET key.

1. )81&7,216(/(&7Press the down arrow,￿then$55press$<237,216the right or left arrow until appears.

Enter a New Password

Enter a new password as follows:

2. Press the down arrow.

3.Press the right or left arrow until 3$66:25'appears.

4.Press the down arrow to view the (17(53$66:25'menu. If &/($5

3$66:25'is displayed, press the right key once to show (17(5

.

5.Press the down arrow.

6. Press four keypad keys in sequence (do not use the RESET key in this sequence), and be sure to note the keys you enter (see example at left: left, left, down, up). This four-key sequence will be your new password. As each password key is pressed, an asterisk is displayed in the panel. When the fourth key is pressed, 3$66:25'6(7is displayed.

21020690 B 6500 Disk Array User’s Guide