Ciprico 6500 manual Liquid Crystal Display LCD, Reset Switch, Select Switch

			Chapter 1 Description
Page 1 - 8			Primary Components
Display/		As shown below, the 6500 display/operation panel includes a liquid crystal
Operation		display (LCD) and six membrane control switches.
	Panel

Figure 4 Display/Operation Panel

Liquid Crystal Display (LCD)

The 6500 display/operation panel’s LCD indicates real-time array status and error conditions, and is used to enter a wide range of setup parameters and operating commands. The LCD displays 2-line by 16-character messages, and indicates the current position in a tree-structured menu of functions. (See Chapter 3, Display/Operation Panel.)

RESET Switch

This switch initiates a reset, which returns the array to an initial power-up condition. In this power-up state, the firmware and SCSI chip are initialized.

Caution The RESET switch initiates a subsystem restart; any activity in progress will be halted without saving information.

SELECT Switch

The SELECT switch is used to initialize new function selections that appear on the LCD display.

Navigation Switches (Up, Down, Left, Right)

The four “arrow” switches on the panel are used to step through options in the tree-structured menu, and to make selections when available. Pressing SELECT initializes the currently displayed option.

21020690 B 6500 Disk Array User’s Guide