Integra DTR-5.3 instruction manual Switching the display, Temporarily turning off the sound

Page 47

Selecting an Audio Component

Using the tone control:

To make bass and treble adjustment work for multichannel sources, you must first set the tone control to “On.”

To turn on the tone control:

1.Press the Surround button (or SURR button on the remote controller).

DTR-6.3/5.3

Remote controller

“Tone On” appears on the display and the tone control is turned on.

Switching the display

While listening to or watching an input source, you can display the information regarding the type of source and signal being input by pressing the Display button on the DTR-6.3/5.3 or the remote controller. You can set separate video displays for when the input source is set to AM or FM broadcasts and for when it is set to anything else.

DTR-6.3/5.3

Remote controller

When an input source other than FM or AM is selected:

Input + volume

2.Press the Audio Adjust button and then the and cursor buttons to select Bass (or Treble).

DTR-6.3/5.3

Remote controller

 

 

 

 

3.Press the and cursor buttons to set the desired level.

DTR-6.3/5.3

Remote controller

To turn off the tone control:

Press the Direct button.

DTR-6.3/5.3

Remote controller

“Tone Off” appears on the display and the tone control is turned off.

Notes:

•When you play back multichannel sources, you can select the Pure Audio mode by pressing the Pure Audio button.

To exit the Pure Audio mode, press the Direct or Surround button (DTR-6.3 only).

•If you change the speaker levels in step 4 above, these new levels for multichannel sources will have no effect on the settings at “Level Calibration.”

•Be aware that the main volume display on the front panel will differ if the speaker volume of even one speaker is changed from 0 decibels. In other words, if all the speaker levels are set to 0 decibels and you increase the main volume, the display will rise to “98,” “99,” and then “MAX.” If you now change the level of one speaker to +5 decibels and you increase the main volume, the display will rise to “93,” “94,” and then “MAX.”

Program format or sampling frequency*

Input + Listening mode or Multich

*When the input signal is digital audio

The program format is displayed. For example, the display “Dolby D: 3/2.1” shows that the format is Dolby Digital with 5.1 discrete channels consisting of three front channels (front left, front right, and center), two surround channels (surround left and surround right), and the low frequency effect (LFE) channel.

When the front channel number is 2, they are the front left and front right; when it is 1, it is monaural. When the surround channel number is 1, it is monaural; when it is 0, there is no surround channel. When the LFE number is 0, there is no LFE channel. Also, if there is no program format for the input signal, nothing will be displayed.

When the input signal is linear PCM

The sampling frequency is displayed. For example, the display “PCM fs: 44.1k” shows that the signal is PCM and that the sampling frequency is 44.1 kHz.

When FM or AM is selected as the input source:

FM/AM frequency +

 

Preset no.

ch

FM/AM +

Listening mode

Temporarily turning off the sound

To turn off the sound momentarily, press the

Remote controller

Muting button on the remote controller. The

 

MUTING indicator will flash and the sound from

 

the speakers or headphones will be switched off

 

by the receiver’s audio muting circuit. Press the

 

Muting button again to turn the sound back on.

 

Flashes

 

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DTR-6.3/5.3 Avis Important SafeguardsPrecautions Contents Contents DTR-6.3 Amplifier Features FeaturesUsing the remote controller Supplied accessoriesBefore using this unit Installing the remote controller batteriesDTR-6.3 DTR-5.3 Front panel facilitiesFront panel facilities Speakers A/B buttons DTR-5.3 only Sleep indicator Muting indicatorListening mode or digital input format indicators Tuning indicatorsRemote controller Remote controller Connections Connections Signal flow Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnections DTR-6.3 Connecting your video componentsConnecting a DVD Player with 5.1-Channel Output Flow of the video signals is as followsConnecting a DVD player DVD Connecting a DVD Player with 2-Channel L/R Audio OutputVideo Connecting a video cassette recorder VideoMonitor OUT Connecting a television monitor or projector Monitor OUTFront left speaker Center speaker Connecting video camera, etc. Video 4 InputPower amplifier Front right speakerWhen using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 PRE OUT terminals When using the Zone 2 Speakers terminalsCD player CD Connections DTR-5.3Video output Connections DTR-5.3Connections DTR-5.3 Video 2/3 Video output Digital output Optical DTR-6.3 only 12V Trigger OUT ZONE2 Power cord supplied To an AC wall outletConnections DTR-6.3/5.3 DTR-6.3/5.3 12V Trigger OUT A/BDirect change function Power on/ready functionPower off function Other component From connecting blockDTR-6.3 only Speaker placement Connecting speakersStandard speaker setup for surround sound Minimum speaker configuration for surround sound playbackConnecting to the Speakers B terminals DTR-5.3 only Connecting speakersConnecting speakers Connecting a subwooferRight Back Left Speaker Front Center Right Speaker LeftSubwoofer Surround Turning on the power Connecting the powerTurning on the power from the remote controller Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaDisplaying the Main Menu Configuring the speakersSpeaker Configuration Adjustable Crossover 80/100/120 Hz for Bass Management Configuring the speakersUse the and cursor buttons to select Left Calibrating the speaker levelsFeet Select if you will enter the distances in feet Meters Select if you will enter the distances in metersButtons used for navigating through the menus Using the remote controller Press the Test buttonPress the Test button to complete the procedure Listening to Radio Broadcasts Listening to a stereo radio station FM modeTuning into a radio station FM Mode Tuning TunerListening to Radio Broadcasts Presetting a radio stationSelecting a preset radio station Erasing a preset radio stationPress the desired input source Adjust the volume to an appropriate levelSelecting an Audio Component Basic operation DTR-6.3Speakers A/B Selecting an Audio ComponentBasic operation DTR-5.3 Selecting speakers Speakers A, B DTR-5.3 onlyTo change the display of the input source from Tape to MD Selecting the type of audio input signalTemporarily changing the speaker output levels Enjoying DVD multichannel audio playback Using the sleep time remote controller onlyListening with headphones Sleep Audio AdjustTemporarily turning off the sound Switching the displayListening Modes Listening Modes While playing back Dolby Digital 2-channel sources Selecting a listening modeRcvr Mode Listening mode buttons TipOriginal filter CinemaFILTER loading for movies Press the Cine Fltr button on the remote controllerInput Selector buttons Input SetupReturn Menu Input source buttons Return Setup Multichannel Input SetupDigital Input Digital FormatDigital Format Source IntelliVolumeAnalog/PCM Source PCM fs96kHz SourcePreference OSD Setup and Other SettingsOSD Setup To display the OSD Setup menuBass, Treble Audio AdjustSetup Procedure Press the Audio Adjust button Setting Values Initial valueAudio Adjust Late Settings possible for each listening modeAdjusting the volume using the remote controller Using the buttons on the DTR-6.3Adjusting the volume for the remote zone Ex. When the CD button is pressedStart recording at the recording component as desired Recording a source DTR-6.3Rec Out Off Input source buttons Recording a source DTR-5.3 Controlling an Onkyo cassette tape deck Using remote controllerCalling up a preset radio station Rcvr Mode VOL MutingControlling an Integra/Onkyo CD player Using remote controllerPress the CD Mode button Controlling an Integra/Onkyo DVD player Top Menu Audio SEL Angle Standby DVD Mode SetupPress the DVD Mode button To 9, 0, --/--- Numeric keys Press the MD Mode buttonControlling an Integra/Onkyo MD recorder Within 30 seconds, enter the 3-digit code number Entering a pre-programming codeLearning a pre-programming code Pre-programming codes Entering a pre-programming codeTV Mode TV Mode Operating your programmed remote controllerDVD Mode DVD Player Mode VCR Mode VCR ModeTo 6 inches To 15 cm Programming procedureIndicator Mode buttons Enter Send/LearnPage Press and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Send/Learn indicator Mode buttons EnterExecuting the macro Using the macro functionProgramming the macro Erasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Macro Macro mode programming memoTroubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Specifications DTR-6.3Specifications DTR-5.3 Onkyo U.S.A. Corporation
Top Page Image Contents