Integra DTR-5.3 Calibrating the speaker levels, Use the and cursor buttons to select Left

Page 39

Configuring the speakers

Setting the speaker distance from your normal listening position

Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in 1-foot (0.3 meter) increments. Select the setting closest to the actual distance from the speaker to your normal listening position.

Note:

Speakers that you selected “No” or “None” for in the “Speaker Config” menu will not appear in this menu.

1. Use the and cursor buttons to select “2. Speaker Distance” on the main menu and then press the ENTER button.

The “Speaker Distance” menu appears.

6.Use the and cursor buttons to select “Surround Back” and then use the and cursor buttons to set the distance from the surround back speakers to your normal listening position.

Press the Return button to return to the main menu.

Press the Menu button on the front panel or Setup button on the remote controller button to exit the Setup menu.

Calibrating the speaker levels

Use this menu to set the volume for each speaker so that each volume is heard by the listener at the same level. This is especially important for speaker layouts where the left and right speakers are at different distances or in asymmetrical positions due to room designs and configurations. These settings and the distance settings performed in the Speaker Distance menu are vital to create the proper sound space and dynamics.

* Menu *****************

1.Speaker Config

2.Speaker Distance

3.Level Calibration 4.Input Setup 5.OSD Setup 6.Preference

ENTERQuit:SETUP

* Menu *****************

1.Speaker Config

 

2.Speaker Distance

2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup

:feet

a.Unit

5.OSD Setup

:12ft

b.Front L/R

6.Preference

:12ft

c.Center

d.Surround L/R

: 7ft

e.Surround Back : 7ft

Quit:SETUP

Note:

The speaker level settings here are not effective for multi-channel input sources. To adjust the speaker levels for multi-channel input sources, you will need to use the CH SEL, Level , and Level buttons on the remote controller. See page 47.

1. Use the and cursor buttons to select “3. Level Calibration” on the main menu and then press the ENTER button.

The “Level Calibration” menu appears.

2.

Use the

and

cursor buttons to select “Unit” and

 

then use the

and

cursor buttons to select the

 

desired unit of measure.

 

 

feet: Select if you will enter the distances in feet.

 

meters: Select if you will enter the distances in meters.

3.

Use the

and

cursor buttons to select “Front L/R”

 

and then use the

and

cursor buttons to set the

 

distance from the front speakers to your normal

 

listening position.

 

 

4.

Use the

and

cursor buttons to select “Center” and

 

then use the

and

cursor buttons to set the

 

distance from the center speakers to your normal

* Menu *****************

1.Speaker Config 2.Speaker Distance

3.Level Calibration

4.Input Setup 5.OSD Setup 6.Preference

ENTERQuit:SETUP

* Menu *****************

1.Speaker Config

 

3.Level Calibration

2.Speaker Distance

***********************

3.Level Calibration

4.Input Setup

: OdB

a.Left

5.OSD Setup

: OdB

b.Center

6.Preference

: OdB

c.Right

d.Surr Right

: OdB

e.Surr Back

: OdB

f.Surr Left

: OdB

g.Subwoofer

: OdB

Quit:SETUP

listening position.

Note:

You can only set a distance less than that set for the front speakers and within 5 feet (1.5 meters) of the front speaker setting. For example, if 30 feet (9 meters) is set for the front speakers, then the center speaker distance can only be set between 25 and 30 feet (7.5 and 9 meters).

5.Use the and cursor buttons to select “Surround L/ R” and then use the and cursor buttons to set the distance from the left surround and right surround speakers to your normal listening position.

Note:

You can only set a distance less than that set for the front speakers and within 15 feet (4.5 meters) of the front speaker setting. For example, if 30 feet (9 meters) is set for the front speakers, then the surround speaker distance can only be set between 15 and 30 feet (4.5 and 9 meters).

Note:

Speakers that you selected “No” or “None” for in the “Speaker Config” menu will not appear.

2. Use the and cursor buttons to select “Left.”

You will hear a pink noise from the front left speaker.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DTR-6.3/5.3 Avis Important SafeguardsPrecautions Contents Contents DTR-6.3 Amplifier Features FeaturesUsing the remote controller Supplied accessoriesBefore using this unit Installing the remote controller batteriesDTR-6.3 DTR-5.3 Front panel facilitiesFront panel facilities Speakers A/B buttons DTR-5.3 only Sleep indicator Muting indicatorListening mode or digital input format indicators Tuning indicatorsRemote controller Remote controller Connections Connections Signal flow Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnections DTR-6.3 Connecting your video componentsConnecting a DVD Player with 5.1-Channel Output Flow of the video signals is as followsConnecting a DVD player DVD Connecting a DVD Player with 2-Channel L/R Audio OutputVideo Connecting a video cassette recorder VideoMonitor OUT Connecting a television monitor or projector Monitor OUTFront left speaker Center speaker Connecting video camera, etc. Video 4 InputPower amplifier Front right speakerWhen using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 PRE OUT terminals When using the Zone 2 Speakers terminalsCD player CD Connections DTR-5.3Video output Connections DTR-5.3Connections DTR-5.3 Video 2/3 Video output Digital output Optical DTR-6.3 only 12V Trigger OUT ZONE2 Power cord supplied To an AC wall outletConnections DTR-6.3/5.3 DTR-6.3/5.3 12V Trigger OUT A/BPower on/ready function Power off functionDirect change function From connecting block DTR-6.3 onlyOther component Speaker placement Connecting speakersStandard speaker setup for surround sound Minimum speaker configuration for surround sound playbackConnecting to the Speakers B terminals DTR-5.3 only Connecting speakersConnecting speakers Connecting a subwooferFront Center Right Speaker Left Subwoofer SurroundRight Back Left Speaker Connecting the power Turning on the power from the remote controllerTurning on the power Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaConfiguring the speakers Speaker ConfigurationDisplaying the Main Menu Adjustable Crossover 80/100/120 Hz for Bass Management Configuring the speakersUse the and cursor buttons to select Left Calibrating the speaker levelsFeet Select if you will enter the distances in feet Meters Select if you will enter the distances in metersUsing the remote controller Press the Test button Press the Test button to complete the procedureButtons used for navigating through the menus Listening to Radio Broadcasts Listening to a stereo radio station FM modeTuning into a radio station FM Mode Tuning TunerListening to Radio Broadcasts Presetting a radio stationSelecting a preset radio station Erasing a preset radio stationPress the desired input source Adjust the volume to an appropriate levelSelecting an Audio Component Basic operation DTR-6.3Speakers A/B Selecting an Audio ComponentBasic operation DTR-5.3 Selecting speakers Speakers A, B DTR-5.3 onlySelecting the type of audio input signal Temporarily changing the speaker output levelsTo change the display of the input source from Tape to MD Enjoying DVD multichannel audio playback Using the sleep time remote controller onlyListening with headphones Sleep Audio AdjustTemporarily turning off the sound Switching the displayListening Modes Listening Modes While playing back Dolby Digital 2-channel sources Selecting a listening modeRcvr Mode Listening mode buttons TipOriginal filter CinemaFILTER loading for movies Press the Cine Fltr button on the remote controllerInput Setup Return Menu Input source buttons Return SetupInput Selector buttons Multichannel Input SetupDigital Input Digital FormatDigital Format Source IntelliVolumeAnalog/PCM Source PCM fs96kHz SourcePreference OSD Setup and Other SettingsOSD Setup To display the OSD Setup menuBass, Treble Audio AdjustSetup Procedure Press the Audio Adjust button Setting Values Initial valueAudio Adjust Late Settings possible for each listening modeAdjusting the volume using the remote controller Using the buttons on the DTR-6.3Adjusting the volume for the remote zone Ex. When the CD button is pressedRecording a source DTR-6.3 Rec Out Off Input source buttonsStart recording at the recording component as desired Recording a source DTR-5.3 Controlling an Onkyo cassette tape deck Using remote controllerCalling up a preset radio station Rcvr Mode VOL MutingUsing remote controller Press the CD Mode buttonControlling an Integra/Onkyo CD player Top Menu Audio SEL Angle Standby DVD Mode Setup Press the DVD Mode buttonControlling an Integra/Onkyo DVD player Press the MD Mode button Controlling an Integra/Onkyo MD recorderTo 9, 0, --/--- Numeric keys Entering a pre-programming code Learning a pre-programming codeWithin 30 seconds, enter the 3-digit code number Pre-programming codes Entering a pre-programming codeTV Mode TV Mode Operating your programmed remote controllerDVD Mode DVD Player Mode VCR Mode VCR ModeTo 6 inches To 15 cm Programming procedureIndicator Mode buttons Enter Send/LearnPage Press and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Send/Learn indicator Mode buttons EnterUsing the macro function Programming the macroExecuting the macro Using the macro function Erasing all commands and macros that have been programmedErasing a macro from the Macro 1 or 2 button Macro Macro mode programming memoTroubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Specifications DTR-6.3Specifications DTR-5.3 Onkyo U.S.A. Corporation
Top Page Image Contents