Recoton/Advent U31-LP2, U31-NG2 Pins on Rear Log Support, PinCutout, Notch Cutout, Bracket

INSTALLATION

3) Place Rear Log A)02-43 on the two pins on	6) Place the Left Top Log D)02-46 on the pin
the rear log support.	on Log C)02-56 and on top of the cutout on
	Log A)02-43.

	A)02-43
45	F)02-48
B)02-

A)02-43

Pins on Rear Log Support

4)Place Front Right Log B)02-45 on the two pins as shown.

B)02-45

5)Place the Middle Left Log C)02-56 on the two pins as shown.

C)02-56

D)02-46

A)02-43

C)02-56

PinCutout

7)Place the notch in Center Log E)02-47 over Log B)02-45 and across the cutout on Log A)02-43.

E)02-47

A)02-43

B)02-45

Notch Cutout

Side View
Bracket	Front edge of
	rear burner

The bottom right edge of Log F)02-48 must sit snugly against the bracket and the front edge of the rear burner.

9)Place Front Left Log G)02-44 onto the 2 front pins as shown.

G)02-44

10)Place the embers and Rockwool on the

exposed front burner tray.

Logs A)02-43, C)02-56,

and B)02-45 in position

Logs D)02-46 and E)02-47 in position.

8)Position notch in Front Right Log F)02-48 on Log E)02-47 and push the bottom right edge against the bracket on the burner tray and the front edge of the rear burner.

			F)02-48
	E)02	-	47
			B)02-45
Notch			Bracket

11)Test fi re to ensure proper light off (make sure fl ame fl ows smoothly from one end of burner to the other. If there is any fl ame hesitation, check that area for any blockage of the burner port.

12)Install fl ush glass and optional bay glass as per instructions in this manual.

			F)02-	A)02-43
			48
-46		47
		-
D)02	C)02-56	E)02		B)02-45
G)02-44

FPI U31-2 Gas Fireplace Insert 11