INSTALLATION
11)Mount the cast faceplate panels onto the insert body, sliding the side fi ller brackets into the space between the glass and the fi rebox. Secure using the 4 remaining black screws, 2 per side.
Slide side fi ller bracket
into gap between glass and fi re box.
HAMPTON CAST FACEPLATE
GRILL INSTALLATION
Before the grills are installed, a grill stop bracket needs to be put in place.
1)The U31 grill stop bracket is installed in the bottom left corner just under the fi rebox with the screw supplied as shown below.
U31 Grill
Stop
Bracket
12)Install the glass trim by inserting the side hooks on the glass trim into the 4 slots between the faceplate and the glass. Push the glass trim down fi rmly with both hands to lock into place.
Side Hook
Slots
13)To put on the Hampton logo, peel the sticker from the back of the logo and place it centered on the bottom left hand corner of the faceplate.
Hampton Logo | Left Hand | |
Side Faceplate | ||
|
2)Place top grill into brackets located inside top of fi rebox as shown.
Bracket inside top of fi rebox.
Bracket
Top Grill 
Note: The top louver should be placed with the curved
3)The bottom louver, shown in the diagram below, has 2 hinges that are attached to the lip on bottom of the unit. Secure using 2 screws per hinge.
18 | FPI |