Integra DTR-5.6 instruction manual About the Remote Controller Modes, Receiver/Tape Mode

Page 12

DTR-5.6.book Page 12 Thursday, September 22, 2005 5:07 PM

Remote Controller

About the Remote Controller Modes

Including the AV receiver, the remote controller can be used to control up to nine different components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the eight Remote Mode buttons.

■Receiver/Tape Mode

In Receiver/Tape mode, you can control the AV receiver

and an Integra cassette recorder connected via .

■DVD Mode

By default, you can control an Integra DVD player in this mode. By entering the appropriate remote control code, you can control components made by other manufactur- ers (see page 79).

■CD Mode

By default, you can control an Integra CD player in this mode. By entering the appropriate remote control code, you can control a CD player, MD recorder, or CD recorder made by another manufacturer (see page 79).

■HDD Mode

This mode is for controlling Integra’s next generation

HDD-compatible components via .

■TV and VCR Modes

With these modes, you can control a TV and VCR. You must enter the appropriate remote control code first (see page 79).

■Cable/CDR and SAT/MD Modes

In Cable/CDR mode, you can control an Integra CD recorder or a cable TV receiver. In SAT/MD mode, you can control an Integra MD recorder or a satellite TV receiver. You must enter the appropriate remote control code first (see page 79).

1

Use the Remote Mode buttons to select a

 

mode.

 

 

2

Use the buttons supported by that mode

to control the component. Receiver/Tape mode: see page 12

DVD mode: see page 14 CD/MD/CDR modes: see page 15 HDD mode: see page 16

TV/VCR/SAT/Cable modes: see page 81

Note:

Some of the remote controller operations described in this manual may not work as expected with other com- ponents.

Receiver/Tape Mode

Receiver/Tape mode is used to control the AV receiver. It can also be used to control an Integra cassette recorder

connected via .

To set the remote controller to Receiver/Tape mode, press the [Receiver] Remote Mode button.

A

 

B

L

C

 

D

 

 

M

 

N

Receiver

O

 

5

P

F

Q

 

G

R

H

S

I

T

1

 

J

 

K

 

 

U

 

V

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DTR-5.6 Important Safety Instructions AvisPrecautions PowerSupplied Accessories Make sure you have the following accessoriesContents Features Before Using the AV receiver Installing the BatteriesUsing the Remote Controller Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Component Video in 1, 2,XM antenna on North American model IR in A/B and OUTThese terminal posts are for connecting speakers in Zone Video 1 IN/OUT and Video 2 IN/OUTFRONT, CENTER, SURROUND, Remote Controller About the Remote Controller ModesReceiver/Tape Mode Remote Controller DVD Mode CD, MD, and CDR Modes HDD Mode Connecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesStrip about 5/8 Connecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Hooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback Connecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Camcorder, Games Console, or Other Device Connecting a CD Player StepConnecting a Turntable Turntable without a Built-in Phono PreampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Power AmplifierConnecting Components Auto Power On/StandbyConnecting the Power Cords of Other Components Connecting the RS232 PortConnecting the Power Cord Standby indicator lights upDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurning On and Standby Smooth Operation in a Few Easy StepsPut the speaker setup micro Phone in the listening positionTurn on the AV receiver Connected TVFirst Time Setup Disconnect the speaker setupPress Enter On completion, the following menu appearsChecking the Results Component Video Setup Lowed by the Setup buttonPress the Setup button Press the Receiver button, folDigital Audio Input Setup Setup closesUse the Up and Down Buttons to select 2. DigitalChanging the Input Display Minimum Speaker ImpedanceTV Format Setup Not North American models AM Frequency Step Setup on some modelsHardware Setup menu appears You must specify the TV system used in your areaSelect a listening mode and enjoy See Using the Listening Modes onPlaying Your AV Components Basic AV Receiver OperationTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio InformationConnecting the XM Antenna Listening to the RadioSigning Up for XM Satellite Radio Channel Search mode Mode button, followed bySelecting XM Radio Channels Use the Up and Down Buttons to select a channelDisplaying XM Radio Information Selecting XM Channels from the Front PanelButtons to select a chan NelPositioning the XM Antenna XM Radio MessagesPresetting AM/FM Stations Selecting PresetsDeleting Presets XM ChannelsUsing the Multichannel DVD Input Using the Multichannel DVD InputMultichannel DVD Input Settings Input ChannelAdjusting Speaker Levels Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesCommon Functions Displaying Source InformationUsing the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverUsing the Listening Modes DVDUse this mode with any stereo or TV, DVD, VHS Use this mode with any stereo movie e.g., TV, DVD, VHSAbout the Listening Modes Sound is output by the front left and right speakersRecording Recording Audio and Video from Separate SourcesRecording the Input Source Onscreen Setup Menus About the Onscreen Setup MenusAdjusting the Listening Modes Audio Adjust MenuUsing the Cine Filter Function Adjusting the Listening Modes Tone Control SettingsPL IIx and Neo6 Settings PL IIx Music 2 ch only Neo6 MusicDolby Digital Settings Mono/Multiplex SettingsLFE Level Setting MultiplexDefault Listening Modes Listening Mode Preset menu AppearsUse the Up and Down Buttons to select 5. Listening Options for that input selector AppearAdvanced Setup Speaker SetupSpeaker Setup menu appears Speaker Config menu appearsAdvanced Setup CrossoverSubwoofer Mode Speaker DistanceSpeaker Distance menu appears Repeat so that the volume Speaker Level CalibrationTest tone from each Speaker is the sameEqualizer Settings Repeat steps 6 and 7 for each speakerButtons to set the a. Use Set Tings option toInput Setup DelayIntelliVolume Volume SetupPreferences OSD Setup 12V Trigger A/B/C SetupLock Setup OSD PositionChanging the Remote Controller’s ID Remote IDsChanging the AV Receiver’s Remote ID Digital Input Signal Formats Buttons to select an input sourceThat’s assigned to a digital input Opt or coax, and then pressConnecting Zone Using Another Amp in ZoneUsing Only Speakers in Zone ZonePowered Zone 2 Setting Zone 2 Out SettingUsing Zone Controlling Zone 2 with the Remote ControllerControlling Zone 2 from the AV Receiver Zone 2 Remote Mode but To adjustTon, and then use the Level Level+ buttonsUsing the 12V Triggers in Zone 2 and the Main Room Repeat this step as necessary for each settingDelay 12V Trigger Setting for Each Input SourceUsing a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components Entering Remote Control Codes Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Integra Components Connected viaResetting the Remote Mode Buttons Controlling Other ComponentsOn, Standby, TV CH +/-, TV CH +Prev CH TV InputLearning Commands from Other Remote Controllers Using Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting Troubleshooting Remote controller doesn’t work Can’t learn commands from another remote controllerSound changes when I connect my head- phones Can’t control other componentsSpecification Amplifier SectionGeneral Video Section3 4 4 1 0

DTR-5.6 specifications

The Integra DTR-5.6 is a high-performance AV receiver that exemplifies the blend of cutting-edge technology and audiophile-grade quality. With a focus on delivering stellar sound performance and versatility, the DTR-5.6 achieves this through a combination of features that enhance both convenience and audio fidelity.

One of the standout features of the DTR-5.6 is its multichannel audio processing capability. Supporting Dolby TrueHD and DTS-HD Master Audio, this receiver can decode high-resolution audio formats that are standard in modern home theater systems. This ensures that users experience soundtracks as intended by their creators, with immersive clarity and depth. Additionally, it incorporates Audyssey MultEQ XT, a sophisticated room calibration technology. This feature analyzes the acoustics of your listening environment, automatically adjusting speaker settings to optimize sound quality based on the specific audio landscape of your room.

Connectivity is another strong point of the Integra DTR-5.6. It provides multiple HDMI inputs, supporting 1080p and 4K video pass-through. This allows users to connect various high-definition devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. The receiver also features built-in Wi-Fi and Ethernet connections, enabling seamless access to streaming services and internet radio. With support for services like Spotify, Pandora, and others, users can easily enjoy their favorite music without needing additional equipment.

The DTR-5.6 is designed with a robust multi-zone capability, allowing users to enjoy different audio content in different rooms simultaneously. This feature provides flexibility and convenience for larger homes. For audiophiles, the receiver is also equipped with high-current amplifiers that ensure dynamic sound reproduction and sufficient power output for driving demanding speakers.

For user convenience, the Integra DTR-5.6 comes with an intuitive on-screen interface and an easy-to-use remote control. The receiver’s sleek design and user-friendly layout make it a great addition to any entertainment setup. Furthermore, it supports various streaming protocols, including Apple AirPlay and Miracast, enhancing its versatility for modern multimedia needs.

In sum, the Integra DTR-5.6 is a powerhouse of an AV receiver, boasting advanced audio processing technologies, versatile connectivity options, and smart features that cater to both casual listeners and serious audiophiles alike. Its combination of performance, flexibility, and ease of use makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents