Integra DTR-5.6 instruction manual Input Setup, Delay

Page 68

DTR-5.6.book Page 68 Thursday, September 22, 2005 5:07 PM

Advanced Setup—Continued

Input Setup

This section explains items on the “Input Setup” menu.

Receiver

 

Enter

 

Return

Setup

Delay

 

■ A/V Sync

 

When using progressive scanning, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals from 0 to 150 milliseconds (ms) in 1 millisecond steps.

1

During playback, press the

 

 

[Receiver] Remote Mode button,

 

followed by the [Setup] button.

 

The main menu appears onscreen.

3

4

5

Use the Up and Down []/[ ] buttons to select “Delay,” and then press [Enter].

The Delay menu appears.

4-1.Delay

 

---------VIDEO1

---------

a.A/V Sync

: 45ms

Press Enter

to see picture while adjusting.

Press Return

to return to setup.

Press [Enter] to see the TV pic- ture, and use the Left and Right []/[ ] buttons to adjust the delay so that the sound and pic- ture are in sync.

Press the [Return] button to return to the Delay menu.

When you’ve finished, press the [Setup] button.

Setup closes.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “4. Input Setup,”

 

and then press [Enter].

 

The Input Setup menu appears.

 

4.Input Setup

 

---------VIDEO1---------

 

1.Delay

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

68

Page 67 Page 69
Image 68
Page 67 Page 69
Contents DTR-5.6 Important Safety Instructions AvisPrecautions PowerSupplied Accessories Make sure you have the following accessoriesContents Features Using the Remote Controller Before Using the AV receiverInstalling the Batteries Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Component Video in 1, 2,XM antenna on North American model IR in A/B and OUTFRONT, CENTER, SURROUND, These terminal posts are for connecting speakers in ZoneVideo 1 IN/OUT and Video 2 IN/OUT Receiver/Tape Mode Remote ControllerAbout the Remote Controller Modes Remote Controller DVD Mode CD, MD, and CDR Modes HDD Mode Connecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Connecting Your SpeakersStrip about 5/8 Speaker Connection PrecautionsConnecting the Speaker Cables Connecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Hooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback Connecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Camcorder, Games Console, or Other Device Connecting a CD Player StepConnecting a Turntable Turntable without a Built-in Phono PreampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Power AmplifierConnecting Components Auto Power On/StandbyConnecting the Power Cords of Other Components Connecting the RS232 PortConnecting the Power Cord Standby indicator lights upDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurning On and Standby Smooth Operation in a Few Easy StepsPut the speaker setup micro Phone in the listening positionTurn on the AV receiver Connected TVFirst Time Setup Disconnect the speaker setupPress Enter On completion, the following menu appearsChecking the Results Component Video Setup Lowed by the Setup buttonPress the Setup button Press the Receiver button, folDigital Audio Input Setup Setup closesUse the Up and Down Buttons to select 2. DigitalChanging the Input Display Minimum Speaker ImpedanceTV Format Setup Not North American models AM Frequency Step Setup on some modelsHardware Setup menu appears You must specify the TV system used in your areaSelect a listening mode and enjoy See Using the Listening Modes onPlaying Your AV Components Basic AV Receiver OperationTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio InformationSigning Up for XM Satellite Radio Connecting the XM AntennaListening to the Radio Channel Search mode Mode button, followed bySelecting XM Radio Channels Use the Up and Down Buttons to select a channelDisplaying XM Radio Information Selecting XM Channels from the Front PanelButtons to select a chan NelPositioning the XM Antenna XM Radio MessagesPresetting AM/FM Stations Selecting PresetsDeleting Presets XM ChannelsUsing the Multichannel DVD Input Using the Multichannel DVD InputMultichannel DVD Input Settings Input ChannelAdjusting Speaker Levels Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesCommon Functions Displaying Source InformationUsing the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverUsing the Listening Modes DVDUse this mode with any stereo or TV, DVD, VHS Use this mode with any stereo movie e.g., TV, DVD, VHSAbout the Listening Modes Sound is output by the front left and right speakersRecording the Input Source RecordingRecording Audio and Video from Separate Sources Onscreen Setup Menus About the Onscreen Setup MenusUsing the Cine Filter Function Adjusting the Listening ModesAudio Adjust Menu Adjusting the Listening Modes Tone Control SettingsPL IIx and Neo6 Settings PL IIx Music 2 ch only Neo6 MusicDolby Digital Settings Mono/Multiplex SettingsLFE Level Setting MultiplexDefault Listening Modes Listening Mode Preset menu AppearsUse the Up and Down Buttons to select 5. Listening Options for that input selector AppearAdvanced Setup Speaker SetupSpeaker Setup menu appears Speaker Config menu appearsAdvanced Setup CrossoverSpeaker Distance menu appears Subwoofer ModeSpeaker Distance Repeat so that the volume Speaker Level CalibrationTest tone from each Speaker is the sameEqualizer Settings Repeat steps 6 and 7 for each speakerButtons to set the a. Use Set Tings option toInput Setup DelayPreferences IntelliVolumeVolume Setup OSD Setup 12V Trigger A/B/C SetupLock Setup OSD PositionChanging the AV Receiver’s Remote ID Changing the Remote Controller’s IDRemote IDs Digital Input Signal Formats Buttons to select an input sourceThat’s assigned to a digital input Opt or coax, and then pressConnecting Zone Using Another Amp in ZoneUsing Only Speakers in Zone ZonePowered Zone 2 Setting Zone 2 Out SettingControlling Zone 2 from the AV Receiver Using ZoneControlling Zone 2 with the Remote Controller Zone 2 Remote Mode but To adjustTon, and then use the Level Level+ buttonsUsing the 12V Triggers in Zone 2 and the Main Room Repeat this step as necessary for each settingDelay 12V Trigger Setting for Each Input SourceUsing a Multiroom Kit with Other Components Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Zone Entering Remote Control Codes Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Integra Components Connected viaResetting the Remote Mode Buttons Controlling Other ComponentsOn, Standby, TV CH +/-, TV CH +Prev CH TV InputLearning Commands from Other Remote Controllers Using Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting Troubleshooting Remote controller doesn’t work Can’t learn commands from another remote controllerSound changes when I connect my head- phones Can’t control other componentsSpecification Amplifier SectionGeneral Video Section3 4 4 1 0

DTR-5.6 specifications

The Integra DTR-5.6 is a high-performance AV receiver that exemplifies the blend of cutting-edge technology and audiophile-grade quality. With a focus on delivering stellar sound performance and versatility, the DTR-5.6 achieves this through a combination of features that enhance both convenience and audio fidelity.

One of the standout features of the DTR-5.6 is its multichannel audio processing capability. Supporting Dolby TrueHD and DTS-HD Master Audio, this receiver can decode high-resolution audio formats that are standard in modern home theater systems. This ensures that users experience soundtracks as intended by their creators, with immersive clarity and depth. Additionally, it incorporates Audyssey MultEQ XT, a sophisticated room calibration technology. This feature analyzes the acoustics of your listening environment, automatically adjusting speaker settings to optimize sound quality based on the specific audio landscape of your room.

Connectivity is another strong point of the Integra DTR-5.6. It provides multiple HDMI inputs, supporting 1080p and 4K video pass-through. This allows users to connect various high-definition devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. The receiver also features built-in Wi-Fi and Ethernet connections, enabling seamless access to streaming services and internet radio. With support for services like Spotify, Pandora, and others, users can easily enjoy their favorite music without needing additional equipment.

The DTR-5.6 is designed with a robust multi-zone capability, allowing users to enjoy different audio content in different rooms simultaneously. This feature provides flexibility and convenience for larger homes. For audiophiles, the receiver is also equipped with high-current amplifiers that ensure dynamic sound reproduction and sufficient power output for driving demanding speakers.

For user convenience, the Integra DTR-5.6 comes with an intuitive on-screen interface and an easy-to-use remote control. The receiver’s sleek design and user-friendly layout make it a great addition to any entertainment setup. Furthermore, it supports various streaming protocols, including Apple AirPlay and Miracast, enhancing its versatility for modern multimedia needs.

In sum, the Integra DTR-5.6 is a powerhouse of an AV receiver, boasting advanced audio processing technologies, versatile connectivity options, and smart features that cater to both casual listeners and serious audiophiles alike. Its combination of performance, flexibility, and ease of use makes it an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents