BRUSH ROLLER
To remove the brush roller, press the button and turn the bearing downward.
Turn the brush slightly to the right and pull it out.
We recommend to regularly remove threads and hair, which have been wound around the brush roller.
FILTERS
When the orange bag full indicator is showing, airflow is reduced. This could be because the filter bag is full, the filters are clogged or there may be a blockage.
CHANGING THE FILTER BAG
1.Remove the filter bag by opening the latch on the side of the bag housing.
2.Close the filter bag with the sealing cap and lift it out
The procedure to replace the bag is illustrated on the front of each bag.
NOTE: You cannot close the bag housing if the bag is fitted incorrectly.
MAINTENANCE
CHANGING FILTERS
Motor Protection Filter
NOTE: This filter can only be accessed by removing the filter bag.
1.Lift the motor protection filter up by the bracket.
2.Replace with new. NOTE: Make sure filter fits in position tightly.
3.Put filter bag back in place.
The filter should be changed when it is dirty, at minimum. No later then replacing 20 filter bags.
Exhaust Filter
NOTE: Recommended to replace every time you replace the Motor Protection Filter.
1.Carefully remove the filter retaining rings and put them to the side.
2.Pull the enforcement strips of the filter out of the housing slot.
3.Remove the filter from the housing.
4.Replace with new in reverse order.
Be sure the filter is fitted correctly in the housing slot and retaining rings are installed correctly. NOTE: If the filter is NOT installed correctly it will be ineffective.
Use ONLY genuine Windsor 
!
CAUTION replacement parts to ensure effectiveness and safety.
DO NOT wash any filters.
86324140 AXCESS 03/25/09 |