Windsor 1.012-061.0, 1.012-062.0 operating instructions Removing Blockages

MAINTENANCE

REMOVING BLOCKAGES

If your bag full indicator light remains lit after you have changed bags and/or filters this is an indication that there may be a blockage somewhere in your unit.

It is important to keep all areas of the system free from blockage, as this may damage your unit or its components.

¾ Check for suction at the end of hose. If
you can only feel a small amount of
suction, there is a block in your hose.
To remove:
1.	Loosen the safety ring on
	the lid.
2.	Remove the hose from the
	machine.
3.	Reverse the airflow through
	the hose by putting the hose
	handle in the connecting
	tube of the filter cover.
4.	Stretch the hose in the spot
	where the blockage may be
	and open/close the end of
	hose until blockage is
	removed.

Hose

Safety Ring

Hose Handle

¾ Check the suction port at the opening

for the hose handle. Remove any

debris you may find.

¾ Check the suction neck of the power

head. Remove any debris you may

find.

¾ Check the trap-door on the bottom of

the power head. Remove any debris

you may find.

¾ Check between the suction neck and

trap-door within the power head, as

obstacles may become lodged in the

travel path. Remove any debris you

may find.

	!	Never clean down
		the hose with a stick
or pointed object.

Filter Cover	Suction	Hose Handle
Opening	Neck	Opening
		(Suction Port)

Trap Door

4-2 86324140 AXCESS 03/25/09