Windsor CLP12IA, CLP12IB, CLP12IE, CLP12IS manual Filling Operations, Filling the Clipper, Chemicals

FILLING OPERATIONS

STEP

1

RECOVERY TANK

	SOLUTION
	TANK
	LEFT SIDE
	OF UNIT
RIGHT SIDE
OF UNIT		STEP
		2

FILL LINE

STEP

3

FILLING THE CLIPPER

NOTE: Use clean bucket of water to fill solution tank

Do not put defoamer, solvents, spotter or prespray chemicals in the solution tank.

Do not allow water to spill into vacuum motor inlet. Dry spillage from top of solution tank before replacing recovery tank.

CHEMICALS		STEP
Suitable Chemicals	Non-Compatible Chemicals	4
Alkalis	Aldehydes
Detergents	Aromatic Hydrocarbons
Hydroxides	SP Butyls
Soaps	Carbon Tetrachloride
Vinegar	Clorox*
	Chlorinated Bleaches
	Chlorinated Hydrocarbons
	Lysol*
	Methyl Ethel Ketone (MEK)
	Perchorethylene (perc)
	Phenolics
	Trichlorethylene
	D-Limonene
* Product Trademark Names
3-7ENG	86038280 04/04/07

Remove solution tank lid

	Add water
	12 gal.
or	(45.5 ltr.)

140°F (60°C)

12 – 24oz.

(356ml – 711ml)

Add cleaning chemical

Replace solution tank lid