CLEANING PROCEDURE
Start at wall closest to power outlet. For large areas flip handle and operate machine in parallel passes, overlapping brush path. Clean perimeter last.
During operation, observe the following: The Clipper is equipped with clear internal covers to facilitate operator viewing of dirty solution and vacuum air flow. During operation, observe the vacuum intake cover. Large amounts of water or foam entering the vacuum system can damage the vacuum motor. If you notice either condition, shut down the machine immediately. Empty recovery tank and/or add defoamer to recovery tank.
OR
STEP
1
STEP
4
SOLUTION |
INTAKE COVER |
VACUUM
INTAKE COVER
Use right side of machine for cleaning against walls.
STEP
5
After cleaning, turn off all controls, return brush to storage position and carefully unplug machine.
STEP
6
OFF
OFF OFF
| 86038280 04/04/07 |