Yeoman YM-CL8HB manual Annual Service

Page 32

MAINTENANCE and SERVICING

For a complete list of spare parts and accessories contact your Yeoman retailer or call 01392 474011

1.ANNUAL SERVICE

1.1Before the start of the heating season strip, inspect and clean the appliance as detailed:

Allow appliance to cool.

Remove all internal parts: baffle, log guard and, for multi-fuel versions, grate system and ashpan

(see Installation Instructions, Sections 2, 3, 4).

Sweep the appliance at this point if necessary.

Vacuum clean any remaining ash and debris from the inside of the appliance. Stovax offer a filter/ collection attachment for vacuum cleaners to protect them from fire ash: Ash Clean (Stovax Part No. 2091).

Clean the internal surfaces of the appliance using a wire brush and scraper as required. Vacuum and brush the resulting debris from the appliance.

Clean the grate parts with a wire brush, and check the parts for any damage. Replace any damaged parts using genuine Stovax replacements parts (see below for details).

Re-fit cleaned internal parts.

Remove glass from door, discard all old rope seals and fit new (see Maintenance and Servicing, Section 5).

Clean the door glass using Stovax Glass cleaner and a soft cloth. Do not use abrasive cleaners on glass.

Do not use acidic cleaners on printed glass.

Fit new door rope seal (see Maintenance and Servicing, Section 6).

Lightly oil the door catch mechanism and hinge pins. Avoid getting oil onto the door seals and glass.

To refresh painted finishes use Stovax paint.

1.2Use genuine Yeoman replacement parts to keep the appliance in safe, efficient working order. This is a list of the maintenance products that may need be required:

This is a list of the maintenance products you may need to use:

Task

Product name

Stovax Code

Number

 

 

Glass cleaning

Stove glass cleaner

4103

(spray on))

 

 

Preventing build-

Protector (15 sachets)

7002

up of creosote in

 

 

Protector (1kg tub)

7025

flue

 

 

 

Sealing flue pipe

Fire Cement (500g tub)

2020

 

 

joints

Fire Cement (600g cartridge)

2021

 

 

 

 

Re-painting

Riva Midnight Black

RVAC011

(150ml aerosol)

 

 

Protecting your

Heat resistant leather gloves

YM-E00007

hands

 

 

Ash Clean

Vacuum Cleaner Attachment

2091

Thermic seal glue

(50ml bottle)

5037

 

14mm Black rope seal

5000

 

(handy pack)

Door sealing rope

 

14mm Black rope seal

4670H

 

 

(25m reel)

 

 

 

15mm x 2mm x 2m

4950

Glass sealing rope

 

 

15mm x 2mm x 25m

4954

 

 

 

 

Mid door sealing

15mm x 2mm x 2m

4952

 

 

rope

15mm x 2mm x 25m

4957

 

 

 

 

These products, available from your local Yeoman retailer, along with regular maintenance and use of correct fuels, will keep the appliance in the best possible condition.

1.3For more information about the Yeoman products please visit our web site at www.yeoman-stoves.co.uk

1.4Burn at a low temperature for the first day of use after any maintenance. This allows the seals, fixing glues and paint to fully cure.

1.5During this time the appliance may give off some unpleasant odours. Keep the room well ventilated to avoid a build-up of fumes.

1.6Your Yeoman retailer can carry out service and maintenance.

32

Image 32
Contents Yeoman CL YM-CL8HBContents Appliance Commissioning Checklist Installation EngineerRetailer appliance was purchased from Essential Information Must be completedUser Instructions General PointsSerial Number ThermostatUse a protected gloved hand to operate Heating System controlsDo not place tool on hot surfaces e.g. top of stove Using the Appliance for the First Time CondensationNormal Running Seasonal USELighting the Appliance Solid fuelDo not load above the log guard or base of baffle Running The applianceBurning wood Burning tips RefuellingThermostat Operation ASH Removal Wood burning tray Extended burningOVER-FIRING Over-firing can cause permanent damage to the applianceGeneral Cleaning Cleaning GlassChimney fire Chimney SweepingTroubleshooting tips Care of stove Seasonal useAll or some of the radiators do not get hot Open up the airwash to makeTECHNICAL SPECIFICATION Standard FeaturesBoiler Output Chart YeomanYeoman Dimensions All dimensions are in mm 25.4mm =Cast Top Plate Incl. feet @ 6mm on underside 563 572 363 105 478 153/6 449 441 225 430 224 317Site Requirements Flue or ChimneyMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue PlateHearth Dimensions Flue Outlet Positions80mm Walls Next to a HearthRequirement for the walls PRE-INSTALLATION Checks FlueWithout Liner System 150 Flue / Chimney SizeVentilation ModelMm² 4400 Additional Ventilation Changes to Document J, England & Wales, from 01/10/2010Installation Instructions Installing the ApplianceTop flue pipe installation Legal requirementsSecure with self tapping screw Seal the connecting joints Rear flue pipe installationDo not use a 90˚elbow to make this connection To chimney connection as detailed in building regulationsFitting and Removal of the Baffle Removal of Riddling MechanismEnsure baffle sits On front supports Baffle In Place Do not modify the baffleRemove Rear Bar see Diagram Lift bars to removeUnscrew the boss Replace in reverse orderHearth Fixing Cast TOPFixing holes Hearth mounts Top Flue Rear FlueCentral Heating System Pipe work Diagrams PumpElectrical Supply Conventional Pipe work systemsFeed Expansion Cistern Link UP Systems Controls GeneralCommissioning CommissioningInstructions for Use Give the copy of the Instructions to the customerAnnual Service Removal of the LOG Guard Fitting and Removal of BaffleFitting a NEW Door Glass Do not use appliance without the log guard in positionMid door Rope seal E Joint Fitting a new door sealDo not over tighten the clamp as this could break the glass Hetas Approved Chimney Sweeps Adjusting Door Catch & HingesTo adjust the door hinge plate assembly Spare Parts List Cast Door Service Records