Wayne-Dalton series 3000 user manual Features

Page 4

Automatic Garage Door Opener – For Residential Doors Only

FEATURES

1.Open and Close Cycle Control: Allows garage door to be started and stopped by push button, transmitter or wall station. The next impulse sends garage door in opposite direction.

2.Emergency Disconnect: Manual disconnect permit- ting operation of door during power failure with auto- matic reconnect when opener is reactivated. See pg 26.

3.Opener light: Automatically turns on when opener is activated and remains on for 4 minutes for convenience and safety.

4.Mechanical Door Lock: When properly adjusted, opener locks door in closed position preventing un- wanted entry. See Adj. # 3 pg 22.

5.Obstruction Warning Light: The convenience light will flash after sensing an obstruction in the down direc- tion and/or if the safety system malfunctions while in the open position.

6.Motor: Permanently lubricated, thermally protected, heavy duty motor with automatic reset.

7.Safety System: Independent up and down force ad- justments. When properly adjusted, the safety system will automatically reverse when obstructed in down di- rection and return to fully open position. The door will stop when obstructed in the up direction. See Adj. #2, pg 22.

8.Infrared Safety Sensors: Wired or wireless infrared reversing sensors detect an obstruction in door path and react by reversing door.

9.Multi-Function Wall Station: Wired wall station pro- vides up/down door motion control and independent overhead light on/off control. Wireless wall station pro- vides up/down door motion control, independent over- head light on/off control, door down delay, adjustable “pet position” function, and “pet position” program but- ton.

10.Homelink™ Compatibility: Opener is capable of “learning” automobile equipped Homelink™ transceiv- ers. Visit: www.homelink.com.

11.Rolling Code Technology: Wireless transmitters and wall stations use rolling code which prevents would-be thieves from “grabbing” the transmitter’s digital code.

Before Starting Installation Read These Instructions Thoroughly to Familiarize

Yourself with All Aspects of Installation and Adjustment!

Caution: If your garage has no service entrance door, install optional outside quick release lock. This accessory allows manual operation of garage door from outside in case of power failure.

Before Starting

Identify the door referring to illustrations below and verify that the door type is a sectional door with curved track. Do not install if the door is any type of one piece door.

Note: The opener has been designed for sectional doors. Do not attempt to install this opener on any style one piece door. Use of the enclosed opener on a one-piece door may result in serious personal injury of property damage.

4

Image 4
Contents Owner Installation Important Installation Instructions Page Features Important PRE-ASSEMBLY Check Attaching Motor Power Head Unit to Rail Positioning and Installing Front Wall BracketPositioning the Motor End of Operator Attach Unit to Front Wall BracketMounting Motor End of Opener Installing Wired Wall Station if included Installing LightMounting Door Bracket Installing Deluxe Wireless Wall Station if included Install Entrapment Warning LabelInstall Wireless Infrared Safety Sensor Bracket Install Wireless Infrared Safety SensorInstall Wired Infrared Safety Sensor Wall Mounting Brackets Install Wiring for Wired Infrared Safety Sensor Connecting Wired Infrared Safety Sensor to OpenerMount Wired Infrared Safety Sensors Connecting Electrical PowerWireless Wall Station Security Code Change and Programming Changing Wireless Wall Station CodeAlignment of the Wireless Infrared Safety Sensors Alignment of the Wired Infrared Safety Sensors Transmitter Security Code Change and ProgrammingProgramming Transmitter to Power Head Unit Two Button Transmitter Security Code Change and ProgrammingConnecting Door Arm to Door Setting Trolley Close Posi- tionUpper Door Arm Positioning IMPORTANT! Test Contact Obstruction Sensing Feature Setting Door Opening TravelInfrared Safety Sensor Obstruction Test Programming Wireless Keyless Entry If IncludedInstalling Wireless Keyless Entry If Included Adjustment # 1 Opening and Closing ForceAdjustment # 2 Contact Obstruction Sensing Closing Direction Adjustment # 3 Positive Mechanical Door LockImportant Safety Instructions HOW to Operate the Wireless Keyless Entry if Included Operation of Your OpenerHOW to Operate the Wireless Wall Station If Included Opener Power Head ControlsPage Twice a Year Once a MonthOnce a Year Trouble Shooting Section Parts Breakdown Rail Assembly All Models Description Per Unit # Per Quantum Accessories Limited Lifetime Warranty Cut Template to Aid in Keyless Entry Installation See Step