Viking Access Systems Q7 manual To Readjust the Close Limit, To Readjust the Open Limit

LIMITS SETUP

!IMPORTANT: If the gate has been manually released and re-engaged:

1.The Open Limit LED will be illuminated solid and the Close Limit LED will be flashing.

2.The gate will not run in the open direction until step 4 is repeated on page 20.

Close Limit Open Limit

To Readjust the Close Limit:

1.Clear the current limit setting by holding down the “Close Limit” button until the LED is flashing.

2.Repeat STEP 2 on page 20 to set the limit.

3.Repeat STEP 4 on page 20 to relearn the installed Positive Stop reference.

To Readjust the Open Limit:

1.Clear the current limit setting by holding down the “Open Limit” button until the LED is flashing.

2.Repeat STEP 3 on page 20 to set the limit.

VIKING TECHNICAL SUPPORT 1.800.908.0884 2 1