
This catalog is out of date, see note on page 2
Bus coupler
Technical data and ordering data
| AF | Connector board ”Remote bus” | 
| UI | Bus converter | 
Fig. 4/20 Bus coupler BK-FF,  function diagram
The DC 
The bus coupler subracks can be fitted either in their own cabi- nets or in the cabinet of an AS automation system depending on the type of remote bus coupling.
Technical data
| Power supply module | 
 | |||
| 
 | 
 | 
 | 
 | 
 | 
| Power supply | DC 24 V | |||
| Current consumption | 1 A | |||
| Bus converter unit UI | 
 | |||
| 
 | 
 | 
 | 
 | 
 | 
| Power supply | DC 24 V | |||
| Current consuption | 450 mA | |||
| Fuse | 1.6 A  | |||
| Interface | 
 | |||
| 
 | 
 | 
 | 
 | 
 | 
| Remote bus | Biphase signals, | |||
| 
 | 
 | 
 | 
 | level approx. 1 V | 
| 
 | 
 | 
 | 
 | 
 | 
Ordering data
| 
 | 
 | Order No. | 
| Bus coupler, consisting of | 
 | 
 | 
| Subrack | 
 | 6DS9  | 
| provided for bus couplers for | 
 | 
 | 
| remote bus coupling  | 
 | 
 | 
| Power supply module | 
 | 6DS1  | 
| DC 24 V/DC 5 V, 18 A | 
 | 
 | 
| Interface module  | 
 | 6DS1  | 
| 8 bit | 
 | 
 | 
| Bus converter UI, | 
 | 6DS4  | 
| required for remote bus coupling | 
 | 
 | 
| (2 off required for single remote buses, 4 off for | 
 | 
 | 
| redundant remote buses) | 
 | 
 | 
| Connector board AF ”Remote bus” | 
 | 6DS9  | 
| with terminating resistor F and | 
 | 
 | 
| with mounting plate, for  | 
 | 
 | 
| 1 connector board is required per bus converter | 
 | 
 | 
| unit UI if not already installed in the cabinet | 
 | 
 | 
| Overvoltage fine protection, can be retrofitted | 
 | 6DS9  | 
| (see page 4/16) | 
 | 
 | 
| Cable connector for  | 
 | 6DS8  | 
| with 3 plugs for connecting the interface | 
 | 
 | 
| modules  | 
 | 
 | 
| (2 off required for  | 
 | 
 | 
| Cable set for power supply | 
 | 
 | 
| to connect the bus coupler subrack to the | 
 | 
 | 
| power distribution subrack DC 24 V mounted in | 
 | 
 | 
| cabinet 1 | 
 | 
 | 
| ¯ Bus coupler subrack in cabinet 1 | 
 | 6DS9  | 
| Tier A (height module U 2 to 7) | 
 | |
| Tier B (height module U 10 to 15) | 
 | 6DS9  | 
| Tier C (height module U 18 to 23) | 
 | 6DS9  | 
| Tier D (height module U 26 to 31) | 
 | 6DS9  | 
| ¯ Bus coupler subrack in cabinet 2 | 
 | 
 | 
| Tier A (height module U 2 to 7) | 
 | 6DS9  | 
| Tier B (height module U 10 to 15) | 
 | 6DS9  | 
| Tier C (height module U 18 to 23) | 
 | 6DS9  | 
| Tier D (height module U 26 to 31) | 
 | 6DS9  | 
| 
 | 
 | 
 | 
| Instructions | 
 | 
 | 
| Bus coupler units | 
 | 
 | 
| German | 
 | |
| English | 
 | |
| French | 
 | |
| Spanish | 
 | 
| 4/14 | Siemens PLT 130 . 1994 |