Remote bus cables, V45466-D21-B55 | Siemens CS 275 manual

This catalog is out of date, see note on page 2

Remote bus cables

Standard remote bus cable	Remote bus cable for special applications

Fig. 4/26 Standard remote bus cable

Fig. 4/27 Remote bus cable with additional armouring

Application

Coaxial cable 2YC(mS) CY1.6/10-75(Z2/5) vs sw is used as standard as the remote bus cable. The cable may be routed in potentially explosive atmospheres to DIN 57 165/VDE 0165, Section 5.6.1 and is also suitable for burial in the ground. Max. permissible length 4000 m.

Coaxial cable 2YC(ms)CY 1.0/6.5--75(Z2/5)vs ws (in-house cable) can be used indoors. Max. permissible length 2000 m.

Design

From inside to outside:

- Cu conductor, silver-coated	- Plastic film
- Polyethylene isolation	- Braiding of Cu wires
- Braining of Cu wires	- PVC sheath, black, wall thicknes
- Plastic film	- approx. 1.8 mm.
- Winding of metal ribbon

Calculation of the max. permissible length of the remote bus cable when using the standard and in-house cables together:

LF= 4000 m -- 2 Li

where Li Length of in-house cable in m; max. 2000 m LF Length of remote bus cable in m

Technical data

External sheath	UV-resistant to VDE 0207, Part 5,
	oil-resistant to IPC EA-S61-402,
	flame-retardant to VDE 0472/A
Sheath color	Black
Remote bus cable	Black
In-house cable	white, pink longitudinal line
Sheath thickness
Remote bus cable	Approx. 1.8 mm
In-house cable	Approx. 0.65 mm
Outer diameter	(16.8 ¦ 0.5) mm
Remote bus cable	(16.8 ¦ 0.5) mm
In-house cable	(9.5 ¦ 0.3) mm
Perm. ambient temperature	- 5 to + 50 qC
Laying	- 5 to + 50 qC
Operation and storage	- 40 to + 70 qC
Curvature (diameter)
Single bending	300 mm; 200 mm (In-house)
Repeated bending	600 mm; 400 mm (In-house)
Tensile strength
Remote bus	660 N
In-house cable	240 N
Weight	Approx. 435 kg/km
Remote bus cable	Approx. 435 kg/km
In-house cable	Approx. 155 kg/km

Application

The cable 2YC(mS)CYbY1.6/10-75(Z2/5) vs (F 0.8 vzk) sw (Order No. V45466-D21-B65) must be used if the tensile strength of the standard remote bus cable is insufficient. This has additional armouring to increase the tensile strength of the cable to 25000 N.

If protection against damage by rodents and mechanical dam- age is required, the cable 2YC(mS)CYbY1.6/10-75 (Z2/5) vs (2 B 0,5 vzk) sw (Order No. V45466-D21-B55) with additional steel-tape armouring should be used. This cable does not have an increased tensile strength.

Design

Both cables have the same basic design as the standard re- mote bus cable (see there) but have additional armouring.

Max. permissible length of remote bus cable: see standard cable.

Technical data

	V45466-D21-B65
	Permissible ambient
	temperature
	Laying		- 5 to + 50 qC
	Operation and storage		- 40 to + 70 qC
	Outer diameter		21.3 mm
	Tensile strength		25000 N
	Weight		Approx. 920 kg/km
	V45466-D21-B55
	Permissible ambient
	temperature
	Laying		- 5 to + 50 qC
	Operation and storage		- 40 to + 70 qC
	Outer diameter		22.1 mm
	Tensile strength		660 N
	Weight		Approx. 923 kg/km

Buried laying of the remote bus cable

The remote bus cable must be laid in sand and covered with a suitable mate- rial, e. g. concrete or plastic slabs. The cable should be laid on a 10-cm thick layer of sand and then covered with another 10 cm sand. A cable for poten- tial equilization must be laid above the remote bus cable.

Ordering data

		Order No.
Standard remote bus cable		V45466-D21-B35
Specify length in plain text
(max. length available in one piece: 1000 m)		. . . m
In-house cable		V45466-D17-B135
Specify length in plain text
(max. length available in one piece: 250 m; ring)		. . . m

Ordering data

		Order No
Remote bus cable with additional armouring		V45466-D21-B65
¯ To increase the tensile strength to 25000 N		V45466-D21-B65
¯ To protect against mechanical damage and		V45466-D21-B55
damage by rodents
Specify length in plain text
(max. length available in one piece: 1000 m)		. . . m

4/18	Siemens PLT 130 . 1994