BURNERS AND GRIDS
✓These parts can be removed and cleaned with appropriate products.
✓After cleaning, the burners and their flame spreaders must be well dried and correct- ly replaced.
✓It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.
✓Check that the electrode “S” (figs. 11 and 14) is always clean to ensure
✓Check that the probe “T” (figs. 11 and 14) next to each burner is always clean to ensure correct operation of the safety valves.
✓Both the probe and ignition plug must be very carefully cleaned.
✓Note: To avoid damage to the electric ignition do not use it when the burners are not in place.
IMPORTANT WARNING
NEVER unscrew the burner plate fixing screws (fig. 10).
The burner plates can be removed ONLY by an authorised service agent.
Damage to the appliance will occur if not observing this condition and this may result in serious injury to the user.
The manufacturer declines every responsibility for any inconvenience resulting from the inobservance of this condition.
Figure 10
15