CDA 4Q4 manual Cooking Points, Control Panel

Page 7

Model: HVG 95

22

4

 

3

1

 

 

Figure 4

13

9

10 12 11

 

 

COOKING POINTS

 

 

 

1.

Auxiliary burner (A)

- 1,00 kW

 

2.

Semirapid burner (SR)

- 1,75 kW

 

3.

Rapid burner (R)

- 3,00 kW

 

4.

Triple ring burner (TR)

- 3,50 kW

 

CONTROL PANEL

5.Auxiliary burner control knob (1)

6.Rapid burner control knob (3)

7.Rear semirapid burner control knob (2)

8.Front semirapid burner control knob (2)

9.Rapid burner control knob (3)

10.Left semirapid burner control knob (2)

11.Triple ring burner control knob (4)

12.Right semirapid burner control knob (2)

13.Auxiliary burner control knob (1)

NOTE:

The appliance is provided with:

gas-lighter incorporated in the knobs

safety valve system. The flow of gas will be stopped if and when the flame

should accidentally go out.

7

 

Image 7
Contents 4Q4 Four Burner Gas Hob Declaration of CE conformity Contents Before Using for the First Time Important Safeguards & Recommendations Features Control Panel Cooking PointsGAS Burners Use of the HobLighting the Burners Max 36 cm Choice of BurnerCorrect USE of TRIPLE-RING Burner Page General Tips Cleaning and MaintenanceGlass Surface GAS Taps Enamelled PartsControl Knobs Important Warning Burners and GridsIt is very important to check that Ignitor S Flame failure probe T Tips For Installation Location Technical Information for the Installer 585 Fastening the Cooktop Ventilation requirements Gas supply requirements Installation & Service Regulations United KingdomGas Connection Installation to Natural GASConnection to the GAS Supply GAS ConnectorReplacing the Burner Injectors Conversion to Natural Gas or LPGCat II 2H3+ Table for the choice of the InjectorsLubrication of the gas taps Minimum Burner Setting AdjustmentElectrical Connection Section of the Supply Cable Type H05V2V2-F Appliance servicing Limit of Cover GuaranteePage Page Gas on glass cooktops