Conversion to Natural Gas or LPG
REPLACING THE BURNER INJECTORS
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can be purchased by contacting the
Choose the injectors to be replaced according to the table on next page.
The injector diameter, expressed in hundredths of a millimetre, is marked on the injector body.
To replace the injectors proceed as follows:
✓Remove the pan supports and the burners covers.
✓Using a wrench, substitute the nozzle injectors “J” (Figs. 25 - 26) with those most suitable for the kind of gas for which it is to be used.
The burners are made in such a way so as not to require regulation of the primary air.
Figure 25
J
Figure 26
J
27