TECHNICAL INFORMATION FOR THE INSTALLER
In order to install the cooktop into the kitchen fixture, a hole with the dimensions shown in fig. 19 has to be made, bearing in mind the following:
✓Within the unit, between the bottom of the cooktop and the upper surface of a shelf there must be a clearance of at least 30 mm.
It is absolutely essential that you place a separator between the base of the cooktop and the
✓The cooktop must be kept no less than 200 mm away from any side wall (fig. 18).
✓There must be a distance of at least 60 mm between the back side of the
✓There must be a distance of at least 650 mm between the hob and any wall cup- board or extractor hood positioned immediately above (see fig. 18).
✓If the hob is installed over a
The two appliances shall be connected to the gas/electric supply with independent connections.
Figure 18
20
| 450 mm |
|
200 | mm | min |
| ||
|
|
650 mm
500 | mm |
|