INSTALLATION AND OPERATION INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND
USING THIS APPLIANCE.
MODEL
IS AUSTRALIAN GAS ASSOCIATION APPROVED FOR NATURAL GAS OR PROPANE AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas consumptions and pressures.
Installation of this appliance should only be carried out by an authorized person in accor- dance with the manufacturers instructions. All relevant codes and regulations laid down by the gas fitting authorities, municipal building regulations, electrical wiring regulations, and the requirements of the AGA Gas Installation Code must be observed.
This appliance and its components are tested and safe when installed in accordance with this Installation Manual. Report to your dealer any parts damaged in shipment, specifically check glass condition. Read all instructions before starting installation and follow these in-
structions carefully during installation to ensure maximum benefit and safety. Failure to follow them will void your warranty and may present a fire hazard.
The Heat & Glo warranty will be voided by, and Heat & Glo disclaims any responsibility for the following actions:
•Installation of any damaged heater or flue system component
•Modification of the heater or balanced flue system installation other than as instructed by Heat & Glo.
•Improper positioning of the gas logs or the glass door
•Installation and/or use of any component part not manufactured or approved by Heat & Glo , not withstanding any independent testing laboratory or other party approval of such component part or accessory.
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these installation instructions may result in a possible fire hazard and will void the warranty. Save this manual for future reference.
Heat & Glo, a brand of Hearth & Home Technologies, Inc. 20802 Kensington Blvd., Lakeville, MN 55044, USA
Copyright 2005 • Printed in U.S.A.
Heat & Glo Quality Systems registered by SGS ICS
2