LOG #3 (SRV2052-701):
Place log #3 onto the back of the burner. The log sits on top of the burner surface. The back of the log is pushed up against the back metal wall of the burner and the left end of the log is flush with the left edge of the metal wall.
LOG #4 (SRV2012-162):
FLUSH END
3
Place log #4 on top of the burner in front of log 3. The triangle shaped groove in the bottom fits onto the right grate tine. The right side is pushed back until it touches the back log. The left end of the log is moved back until it almost covers the burner ports behind it. Do NOT cover the burner ports.
LOG #5 (SRV2012-163):
Place log #5 in front of log #4. The groove in the bottom end of the log fits into the right vertical grate tine. The back of the log rests in the small flat spot on top of log #3.
3
4
3 5
4
38 | Heat & Glo • |