Hearth and Home Technologies SOHO-CE Flue Information and Diagrams, Flue Table Key, Use of Elbows

Page 10

5 Flue Information and Diagrams

A. Flue Table Key

The abbreviations listed in this flue table key are used in the flue diagrams.

Symbol

Description

V1

First section (closest to appliance) of vertical length

 

 

V2

Second section of vertical length

 

 

H1

First section (closest to appliance) of horizontal length

 

 

H2

Second section of horizontal length

 

 

WARNING

Fire Hazard. Explosion Risk. Asphyxiation Risk.

Do NOT connect this gas appliance to a chimney flue serving a separate solid-fuel or gas burning appliance.

• Vent this appliance directly outside.

• Use separate flue system for this appliance.

May impair safe operation of this appliance or other appliances connected to the flue.

B. Use of Elbows

CAUTION

ALL flue configuration specifications MUST be followed.

•This product is tested and listed to these specifications.

•Appliance performance will suffer if specifications are not followed.

Diagonal runs have both vertical and horizontal flue as- pects when calculating the effects. Use the rise for the vertical aspect and the run for the horizontal aspect (see Figure 5.1).

Two 45º elbows may be used in place of one 90º elbow. On 45º runs, 30.5 cm of diagonal is equal to 21.6 centimeters horizontal run and 21.6 centimeters vertical run. A length of straight pipe is allowed between two 45º elbows (see Flue diagrams).

Vertical

cm21.6

21.6 cm

Horizontal

Figure 5.1

C. Measuring Standards

Vertical and horizontal measurements listed in the flue diagrams were made using the following standards.

1. Pipe measurements are from center line to center line.

2. Measurements are made from the appliance outer wrap, not from the standoffs.

3. Horizontal terminations are measured to the end of termination cap.

4. Vertical terminations are measured to bottom of termi- nation cap.

5. Horizontal pipe installed level with no slope up or down.

10

Heat & Glo • Soho-CE • 2111-900 Rev. D • 6/07

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Soho-CE What to do if you smell gasCongratulations Homeowner Reference InformationTable of Contents Non-Combustible Materials Specification Listing and Code ApprovalsAppliance Certification Combustible Materials SpecificationInspect Appliance and Components Design and Installation ConsiderationsGetting Started Tools and Supplies NeededSelecting Appliance Location Framing and Clearances84.1 74.0 118.7 89.2 Constructing the Appliance Chase ClearancesSee .4 for specific clearances Termination LocationsFlue Termination Minimum Clearances Cm minimum in snow regionsAlcove Applications Use of Elbows Flue Information and DiagramsFlue Table Key Measuring Standards+ H Maximum = 11.9 m Maximum = 4.6 m Flue Diagrams Horizontal Termination One Elbow Two ElbowsOne Elbow Minimum Maximum Two Elbows Minimum + H 2 Maximum Elbow only Not AllowedThree Elbows Minimum Maximum Horizontal Termination Three Elbows+ V 2 + H = Maximum = 11.9 m + H 2 Maximum = 4.6 m Two Elbows V1 Minimum Maximum Vertical Termination No Elbow Two ElbowsV1 = 11.8 m Maximum V1 + V2 + H Maximum = 11.9 mThree Elbows V1 Minimum H1 + H2 Maximum Vertical Termination Three Elbows+ V2 + H1 + H2 Maximum = 11.9 m Maximum = 4.3 m Wall Penetration Framing Flue Clearances and FramingPipe Clearances to Combustibles Combustible Wall PenetrationInstalling Attic Shield Installing the Ceiling FirestopVertical Penetration Framing Appliance Preparation Securing and Leveling the ApplianceInstall Support Brackets Installing Flue PipeAssembly of Flue Sections Attach the First Flue Component to Starting CollarsInstalling the Horizontal Termination Cap Installing Firestops and Horizontal Termination CapFor Horizontal Runs Wall shield firestops are Required Install Roof Flashing and Vertical Termination Cap Assembling and Installing Storm Collar Sharp EdgesGas Connection Gas InformationGas Pressure Requirements Natural Gas Propane Butane G20 G31 G30 G25Electronic Ignition System Wiring Electrical InformationMantel Projections FinishingFacing Material See for combustible/non-combustible definitionsAccessories Appliance SetupClean the Appliance Ember PlacementLog Assembly LOGS-SOHOCE Positioning the LogsRemoving Glass Assembly Glass AssemblyReplacing Glass Assembly Operating Instructions Before Lighting ApplianceLighting the Fireplace Electronic IgnitionInitial Break-in Procedure Frequently Asked QuestionsAfter Appliance is Lit Electronic Ignition System TroubleshootingSymptom Possible Causes Corrective Actions No transmission, motor Receiver mustMaintenance Tasks Maintaining and Servicing ApplianceVerify no obstructions to airflow through the louvers Inspect Maintenance TasksRecommend addition of screen if one is not present Operating properly. Replace as necessaryReference Materials Appliance Dimension DiagramAppliance Dimensions Table Location CentimeterLog Set Assembly Service Parts List108 SOHO-CE Service Parts SOHO-CELimited Lifetime Warranty Limited Lifetime Warranty Heat & GLO GAS Appliance ProductsContact Information Important operating

SOHO-CE specifications

Hearth and Home Technologies (HHT) has long been a leader in the design and manufacturing of innovative hearth products, and their SOHO-CE model is no exception. This sleek and modern electric fireplace represents a perfect synthesis of aesthetic appeal and functional engineering, specifically tailored for small office/home office (SOHO) settings.

One of the standout features of the SOHO-CE is its Clean Edge design, which allows for a seamless installation that blends effortlessly into any room. This contemporary electric fireplace has a minimalist frame available in various finishes, making it versatile enough to complement different interior styles, from modern to rustic. Its elegant look is well-suited for both residential and commercial spaces, providing an inviting ambiance that enhances the room's overall atmosphere.

The SOHO-CE employs state-of-the-art LED technology to create realistic flame effects. These flames can be adjusted to suit individual preferences, giving users control over the intensity and color. This customization is essential in creating the ideal mood for any occasion, whether it’s a productive workday or a cozy evening at home. In addition, the electric fireplace boasts a safe and efficient heat source with adjustable heat settings, ensuring comfort without compromising safety.

Smart technology integration is another significant characteristic of the SOHO-CE. It can be controlled via a user-friendly app, allowing for remote operation right from a smartphone or tablet. This feature is particularly beneficial for those who want to set the fireplace to a specific schedule, ensuring their space is warm and inviting upon arrival.

In terms of energy efficiency, the SOHO-CE stands out with its eco-friendly operation. As an electric fireplace, it eliminates the need for venting and reduces the emission of pollutants, making it a responsible choice for the environment. It also offers the convenience of heating only when necessary, reducing energy consumption.

Durability is built into the SOHO-CE’s design, featuring high-quality materials that ensure longevity and performance. This electric fireplace is also easy to maintain, with no need for chimneys or flue cleaning. Overall, Hearth and Home Technologies' SOHO-CE is a remarkable addition to any SOHO setting, marrying functionality with style for an exceptional user experience. Whether for work or leisure, this electric fireplace elevates any space.
Top Page Image Contents