Goodman Mfg TSTATG2111 owner manual Programmable or Non-Programmable Thermostat

Air Conditioning & Heating

Programmable or Non-Programmable

Thermostat

When the very simplest operation is desired, this thermostat may be configured to be non-programmable, with or without Auto- Changeover. Follow the step below.

4

If ‘NO’ is selected, the thermostat will lockout the Program On screen; only the Off, Heat, Cool, and Auto screens may be accessed by pressing the MODE button.

Select ‘YES’ if you would like your thermostat to be programmable, then the Program mode will be accessible through the use of the MODE button.

Press SETUP button to enter Setup screens.

Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.

YES

Select Yes if you would like the thermostat to be program- mable or No for non-program- mable.

NO

Y ES	Program On Setup
	1

Press

SETUP

Press the SETUP button to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds.

Page 4.2