Air Conditioning & Heating
How to Set and Reset the UV Light
Run-Time Alert
This counter keeps track of the number of days since the UV Light counter has been reset. The UV Light icon will appear after the number of days has been achieved, as shown in step #9 (below). Setting the counter to zero in Step #9 will prevent the Service UV Light icon from ever appearing.
9
MODE
Press SETUP button to enter Setup screens.
Press the MODE button repeatedly until this setup screen appears.
Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.
| Days since the UV Light |
|
|
| |
| icon has been reset |
| 0 | Setup | |
Press | 8 | ||||
Service | |||||
| Reset the counter to 0 to | UV Light |
|
remove the Service UV Light icon from the display.
Press the MODE button repeatedly
MODE
until this setup screen appears.
| 0 | Setup |
| 9 | |
Adjust the number of days | Service | |
in increments of 10 before | UV Light |
|
the UV Light icon appears |
|
|
on the display. 0 = off. |
| Press |
(0 - 1990 days) |
|
|
Press the PROGRAM button to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds.
Page 9.3