Wireless Chime
This package includes (Style of pushbutton and chime may vary from illus- tration):
¥Wireless chime
¥Wireless pushbutton w/battery
¥Hardware pack
You'll need to buy 2 "C" alkaline batteries for the chime. In typical use, alkaline batteries will last up to one year.
Case Style "A"
Case Style "B"
1.Install alkaline type A23 12 volt pushbutton battery. Remove back of case by pushing in tab on bottom with a small screwdriver. Make sure battery is oriented properly (see page 3).
2.Open chime case. |
|
|
Press in catch on bot- |
| 12345678 |
|
| |
tom of chime and lift the |
|
|
case open. |
|
|
3. Install 2 alkaline "C" | Battery | Battery |
batteries. Make sure |
|
|
batteries are oriented |
|
|
properly. |
|
|
4. Test range. Temporarily position chime and pushbutton where you want them mounted. Press pushbutton to verify chime and pushbutton work properly. If chime does not sound, see Troubleshooting.
5.Mount pushbutton and chime.
Use either screws or double sided tape to mount pushbutton.
To mount with screws, remove back of case by pushing in tab on bottom with a small screwdriver.
© 2003 DESA Specialty Productsª |