Desa Door manual Tune Settings, Pushbutton Battery Replacement

Tune Settings

Your wireless chime has different selectable tunes: Ding (one note), Ding- Dong (two note), or Westminster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune (or Westminster, when avail- able). This tune can be changed by following the instructions below.

¥Ding (one note tune)

Pushbutton: Add a jumper to location 8.

¥Ding-Dong(two note tune)

Pushbutton: Remove jumper from location 8.

Chime: Remove jumper from location 8.

¥Westminster (Eight note tune) (Available on selected chimes) Pushbutton: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. We recom- mend the back door use the Ding tune and the front door use the Ding- Dong tune (or Westminster tune, available on selected chimes). Models that include two pushbuttons will come factory set for front and back doors. Decals on the rear of the pushbutton will indicate its setting.

Inside Chime

Pushbutton Battery Replacement

Install an alkaline type A23 12 Volt battery. The positive terminal should be positioned as shown.

12345 678	12345 678
Tune Setting	Inside
(Not used on
	Pushbutton
all models)

*Code Settings 1-7 Must Match Both Pushbutton and Chime

Tune Setting

Note: Some models might re- quire the use of tweezers to re- move and replace the jumpers.

595-5551-09 -3-