Hearth and Home Technologies 823-0170 - MBK owner manual Reversible Flue Collar

Page 12

R

Isle Royale Wood Stove

B. Reversible Flue Collar

The fl ue collar is reversible for either a top or rear venting installation. The unit is shipped with the fl ue collar in the top vent position.

Converting Collar For Rear Vent Installation

1.Remove 5 Phillips head screws from the rear shield, lift shield up and set aside.

2.Remove bolts from each side of the fl ue transition (2 total). (Place your free hand in fl ue opening to locate and retrieve nuts attached to bolts.)

3.Turn vent to horizontal position. Inspect sealant to ensure a leak free application.

4.Re-assemble in reverse order.

Rear Flue Defl ector Cover Plate

This cover plate is used when the fl ue collar is turned for a rear vent application.

Please note this cover plate will not

work with the Low-Profi le Kit

Figure 12.1

1.After the fl ue collar has been reversed for a rear vent installation, install the cover plate on the stove with the two screws provided. Figure 12.2.

2.Bend the cover plate fl ange down. Figure 12.3.

3.Secure the cover plate with the remaining two screws.

Mounting Screws

Figure 12.2

Bend Flange Down

Figure 12.3

Page 12

250-5763E

November 22, 2011

 

Image 12
Contents Non-Catalytic, Top-load, Wood Heater MBK PMHHot glass will cause burns Isle Royale Wood Stove Welcome to the Quadra-Fire FamilyTable of Contents Isle Royale Wood Stove Listing and Code Approvals Appliance Certifi cationBTU & Effi ciency Specifi cations Mobile Home ApprovedFire Safety Isle Royale Wood Stove Getting StartedNegative Pressure WindwardFlue Draft Considerations Venting SystemsTools And Supplies Needed Inspect Appliance & Components and Pre-Burn Check ListTypical Stove Systems Masonry ChimneyIsle Royale Wood Stove Dimensions and Clearances Appliance DimensionsFor TOP Vent Installations Clearances To Combustibles UL And ULCIsle Royale Wood Stove Installation Considerations Hearth Protection RequirementsSee Figure USA Required Canada RecommendedConverting Collar For Rear Vent Installation Reversible Flue CollarRear Flue Defl ector Cover Plate Outside Air Kit Installation Installation Of Optional BlowerItems Needed for Installation 4 inch 102mm diameter Isle Royale Wood Stove Chimney Requirements Venting ComponentsChimney Systems Components Air ClearancesInstructions Masonry Chimney Liner Chimney Height / Rise and RunInstalling Chimney Components Masonry Chimney Liner ContdChimney Termination Requirements RuleIsle Royale Wood Stove Mobile Home Installation 629M, Standard for Factory Built ChimneysAdjusting The Blower Speed Control Door Handle Assembly Isle Royale Wood Stove Appliance Set-UpSymptoms of Over-Firing Isle Royale Wood Stove Operating InstructionsOver-Firing Your Appliance Wood Selection and Storage Fire RiskBurning Process Kindling or First StageSecond Stage Combustible/Non-Combustible Materials Air ControlsHeat Output Settings Operating The Top Loading OptionBurn Rates Building a Fire Frequently Asked Questions Optional Blower Operating InstructionsOpacity Smoke Clear SpaceGeneral Maintenance Cleaning Plated Surfaces Glass Cleaning Frequency As desiredDisposal of Ashes Inspect Firebrick & Replacement Instructions Glass ReplacementAppliance Inspection Routine Quick Reference Maintenance Guide MonthlyIsle Royale Wood Stove Troubleshooting Guide Start Fire Problems Possible Cause SolutionService Parts Exploded Drawing Part number list on followingNon-Catalytic, Top-Load Wood StoveService Parts and Accessories #9 Baffl e AssemblyStocked At DepotStocked at Depot #13 Door Assembly 13.9 13.1 13.8 13.2 13.7 13.4 13.3 13.5 13.6Stocked at Depot #19 Brick Assembly Brick, Uncut Must specify size when ordering19.5 19.3 Accessories Service And Maintenance Log Date of Service Performed By Description of ServiceWarranty Policy Isle Royale Wood Stove Contact Information