Baxi Potterton 30 HE manual Plume Displacement Kit b, Elbow/Plume Outlet Assembly

Page 23

93° Elbow/Plume

Outlet Assembly

 

60Ø Support

O Ring

Bracket

0.9 metres

60Ø Exhaust

Flue Pipe

60Ø Support

Bracket

Fig. 14a

O Ring

Flexible Flue

Trim

Adaptor

‘Jubilee’ Clip

O Ring

60/100Ø Concentric Flue

Fig. 14b

9.0Plume Displacement

9.1Plume Displacement Kit (Fig. 14b)

Kit No 5117379, or 5118638 (incl. boiler elbow) Content of kit

10.9m 60/100 Concentric Flue

11m 60 Dia Exhaust Flue Pipe

1Adaptor

260 Dia Support Brackets

193° Elbow/Plume Outlet Assembly

1Flexible Flue Trim

3“O” Rings

1 ‘Jubilee Clip

1 Boiler Elbow

1.This kit is recommended for installations where the condensate plume emitted from the flue may cause a nuisance or affect the surroundings.

2.The terminal must be positioned outside the building with the air inlet facing downward and outlet connection upwards.

3.The plume outlet must always be at least 45° to the wall, with the ‘peak’ uppermost to prevent rain entry (Figs. 15 & 16), and be at least 2 metres above ground level. It must be secured as shown in Fig. 12a. The plume outlet must also be at least 500mm from the air inlet in any direction (Fig. 16).

45°

Fig. 15

Outlet must be at 45° least 45° from

wall face

Air Inlet at Bottom

‘Peak’ Uppermost

500mm Min.

Fig. 16

NOTE: The outlet must be positioned so that any condensate plume is directed away from adjacent surfaces. There must be a constant fall along the entire length of the flue system from the outlet back to the boiler.

4.It is possible to reduce or increase (with the addition of extensions) the length of either or both the 60/100 concentric and 60Ø exhaust.

5.Standard concentric flue extension kits may be added between the boiler elbow and the terminal assembly.

6.The minimum length of the concentric flue is 100mm when measured from the edge of the flue elbow.

IMPORTANT: The maximum equivalent length of

concentric flue is:- 1.5 metres

Additional bends may be fitted in the concentric flue, but the equivalent length must be reduced by 1 metre (93° bend) or 0.5 metres (45° bend).

7.60Ø 1 metre extensions (including support bracket), and additional 93° & 45° elbows are available. Any additional 93° & 45° elbows must be accounted for when calculating flue lengths.

NOTE: Permitted positions of the plume outlet relative to doors, windows etc. are the same as for conventional concentric flues as detailed in the main Installation & Servicing Instructions and BS5440 Pt. 1. It is NOT necessary to fit a terminal guard over the air inlet or the plume outlet.

© Baxi Heating UK Ltd 2007

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Installation & Service Instructions Contents Scheme Members only Installer Notification GuidelinesCodes of Practice, most recent version should be used Important Installation, Commissioning, Service & RepairLegislation Technique Safe Manual HandlingGeneral PreparationCase Front Panel Control Box Data Badge IntroductionDescription Optional Extras1211 30 31 32 General LayoutLayout Appliance Operation Central Heating Mode FigDomestic Hot Water Mode Fig Frost Protection ModePerforma 30 HE Technical DataDimensions and Fixings Bypass System DetailsInformation Central Heating CircuitPressure Relief Valve Fig System Filling and PressurisingHard Water Areas Domestic Hot Water Circuit FigShowers Clearances Figs Site RequirementsLocation Electrical Supply Ventilation of CompartmentsGas Supply Condensate Drain External termination via internalOr Door Plume Displacement KitFlue Built-in element such as a window frame. See BS 5440 PtThis bend is equivalent to 1 metre Flue OptionsHorizontal Flues Horizontal Flue Systems1m extension 45bend 25m 91.5bend Vertical Flues Twin PipeTwin & Vertical Flue Systems Metre for each 91.5 elbow Metre for each 45 elbow5111079 Flue AccessoriesKey Accessory Size For Twin Flue Systems fit the adaptors as follows Flue Duct AdaptorAir duct adaptor Terminal Guard Fig Flue DimensionsFor Roof Terminals Flue TrimRing Bracket Metres 60Ø Exhaust Flue Pipe 60Ø Support Plume DisplacementPlume Displacement Kit b Elbow/Plume Outlet AssemblyDetermining Permissible Lengths Screw 30mmGeneral Fitting Notes Min metres Flue Trim SpigotPlume Outlet Elbow Preparing The Boiler InstallationInitial Preparation FlushingRemove the sealing caps from the boiler connections Fitting The BoilerCondensate Drain see section Pressure Relief Valve Discharge Pipe Wall PlateWall Thickness Flue Elbow Adaptor Fitting The FlueVertical Flue WasteY Flue Inner Flue Support Bracket Flue ElbowPreliminary Electrical Checks Making The Electrical ConnectionsCommissioning the Boiler Commissioning the BoilerPressure Test Point Sealing Screw Checking the Burner PressureCase Front Panel Facia Panel CompletionCompletion 13 .1 Annual Servicing Servicing the BoilerAnnual Servicing Fan Figs Pressure Switch FigChanging Components Burner Fig 14.0 Changing ComponentsHeat Exchanger Fig Reassemble in reverse order Injectors FigElectrodes Fig Insulation FigGas Valve Fig Central Heating Temperature Sensor FigSafety Thermostat Fig DHW Temperature Sensor FigAutomatic Air Vent Fig Pump Head Only FigPump Complete Fig Condensate Trap Fig Pressure Gauge FigsExpansion Vessel Fig 14.19 P.C.B. Fig Selector Switch FigPlate Heat Exchanger Fig Flow Regulator Figs Diverter Valve AssemblyFlue Overheat Thermostat Fig Secondary Heat Exchanger FigControl PCB Illustrated Wiring DiagramFault Finding Turn selector to neon illuminated Microswitch terminalsDiverter valve spindle Assembly faulty Domestic Hot Water Follow operational sequenceAcross terminals 5 Replace microswitch Check wiring PCB A4 connector Replace selector Terminals 4Replace pump PCB A4 connector terminals 3 Replace PCB PCB A2 connector, isGas at burner PCB A1 connector has 230V ACTurn selector switch To ‘Reset’ positionON/OFF/RESET selector when turned to ‘Reset’ position 154 Short Parts ListShort Parts List 131GAS Boiler Commissioning Checklist Service Interval Record Potterton
Related manuals
Manual 12 pages 48.65 Kb

30 HE specifications

The Baxi Potterton 30 HE is a popular choice among homeowners seeking an efficient and reliable boiler solution. Recognized for its compact design and advanced technologies, this boiler is ideal for various residential heating needs.

One of the standout features of the Baxi Potterton 30 HE is its high efficiency rating, which ensures lower energy consumption and reduced utility bills. With an impressive efficiency of up to 90%, this boiler operates at a much higher capacity compared to older models, making it both environmentally friendly and cost-effective. The 30 HE is particularly well-suited for medium to larger homes with a higher demand for hot water.

The Baxi Potterton 30 HE incorporates a range of innovative technologies aimed at enhancing performance and reliability. The automatic modulation function adjusts the boiler's output according to demand, ensuring that it only works as hard as necessary. This not only prolongs the lifespan of the unit but also maximizes comfort levels in the home.

Another feature of the 30 HE is its low noise operation. This boiler has been specifically designed to minimize sound, allowing it to operate quietly in the background without disturbing daily activities. This makes it an ideal choice for homes where noise can be a concern, particularly in open-plan living spaces.

The compact dimensions of the Baxi Potterton 30 HE make it easy to install in various locations, whether it be in a kitchen, utility room, or even a loft space. Its lightweight construction further simplifies the installation process, saving both time and labor costs.

In terms of user-friendliness, the boiler is equipped with an intuitive control panel that allows homeowners to easily adjust settings and monitor performance. This user-centric design ensures that even those who may not be technically inclined can manage their heating requirements with ease.

Safety features are also a priority in the design of the Baxi Potterton 30 HE. It includes built-in safety mechanisms such as frost protection and a burner pressure monitoring system, which work to prevent overheating and ensure optimal operation.

Overall, the Baxi Potterton 30 HE is an efficient, reliable, and user-friendly boiler that meets the heating demands of modern homes. Its blend of advanced technologies, compact size, and focus on safety make it a standout choice for homeowners seeking a high-performance heating solution.
Top Page Image Contents