Husqvarna E20 manual Raise or Lower the Feed DOG

Page 18

RAISE OR LOWER THE FEED DOG

For normal sewing, keep the feed dog up. For free- motion embroidery, sewing on buttons and darning, lower the feed dog.

1.Remove the accessory tray.

2.Move the drop feed lever to (b) to lower the feed dog.

To raise the feed dog move the lever to (a) .

The feed dog will come up when you start to sew.

18

Image 18

Contents E20 Important Safety Instructions Contents Principal Parts Page Accessories Slide on the SNAP-IN Accessory BOX Connecting the Machine to Power Source For the USA and CanadaChanging the Bulb Replace bulb with same type rated WattsAdjusting the Presser Foot Pressure TWO-STEP Presser Foot LeverAttaching the presser foot Presser Foot ShankAttaching the presser foot shank Removing the presser footWinding the Bobbin Inserting the Bobbin Changing the Needle System 130/705H Threading the Upper Thread Bringing UP the Bobbin Thread Thread Tension Upper thread tensionRaise or Lower the Feed DOG Removing the Fabric Reverse SewingChanging Sewing Directions Cutting the ThreadHOW to Choose Your Pattern Matching Needle / Fabric / Thread Needle, fabric, thread selection guideFunction of stitch length dial while zigzaging ZIG ZAG SewingFunction of stitch width dial Satin stitchStraight Stitching and Needle Position Double overlock stitch Overlock StitchesSeams, overcasting, visible hems Standard overlockBlind HEM ONE Step Buttonholes Making a ButtonholeMaking a Buttonhole on Stretch Fabrics E Left and Right Side Balance for Buttonhole Zippers and Piping Step ZIG-ZAG Sewing elasticJoining fabric Stretch Stitch Selection Triple straight stitch 1/3Triple zig-zag 2/4 Free Motion Darning Darning Quilting Cleaning and lubricating the hook MaintenanceCleaning the feed dog Remove the stitch plateTroubleshooting Guide Problem Cause CorrectionVSM Group AB SE-561 84 Huskvarna Sweden