Husqvarna E20 manual Maintenance, Remove the stitch plate, Cleaning the feed dog

Page 34

MAINTENANCE

Caution: Always make sure the machine is unplugged from the power source and the main switch is on “O” before inserting or removing any parts and before cleaning.

Remove the stitch plate:

Turn the handwheel until the needle is fully raised. Open the hinged front cover and unscrew the needle plate screw with the screw driver. (1)

Cleaning the feed dog:

Remove the bobbin case and use the brush supplied to clean the whole area. (2)

Cleaning and lubricating the hook:

Remove the bobbin case. Snap the two hook retaining arms (a) outwards. Remove the hook race cover (b) and the hook (c) and clean with a soft cloth. Lubricate at the points (d) (1-2 drops) with sewing machine oil. Turn the handwheel until the hook race (e) is in the left position. Replace the hook (c). Replace the hook race cover and snap back the two hook retaining arms. Insert he bobbin case and bobbin and replace the stitch plate.

Important: Fabric ﬂuff and threads must be removed regularly. Your machine should be serviced at regular intervals at one of our service agencies.

34

Image 34

Contents E20 Important Safety Instructions Contents Principal Parts Page Accessories Slide on the SNAP-IN Accessory BOX Connecting the Machine to Power Source For the USA and CanadaChanging the Bulb Replace bulb with same type rated WattsAdjusting the Presser Foot Pressure TWO-STEP Presser Foot LeverAttaching the presser foot Presser Foot ShankAttaching the presser foot shank Removing the presser footWinding the Bobbin Inserting the Bobbin Changing the Needle System 130/705H Threading the Upper Thread Bringing UP the Bobbin Thread Thread Tension Upper thread tensionRaise or Lower the Feed DOG Removing the Fabric Reverse SewingChanging Sewing Directions Cutting the ThreadHOW to Choose Your Pattern Matching Needle / Fabric / Thread Needle, fabric, thread selection guideFunction of stitch length dial while zigzaging ZIG ZAG SewingFunction of stitch width dial Satin stitchStraight Stitching and Needle Position Double overlock stitch Overlock StitchesSeams, overcasting, visible hems Standard overlockBlind HEM Making a Buttonhole ONE Step ButtonholesMaking a Buttonhole on Stretch Fabrics E Left and Right Side Balance for Buttonhole Zippers and Piping Sewing elastic Step ZIG-ZAGJoining fabric Triple straight stitch 1/3 Stretch Stitch SelectionTriple zig-zag 2/4 Free Motion Darning Darning Quilting Cleaning and lubricating the hook MaintenanceCleaning the feed dog Remove the stitch plateTroubleshooting Guide Problem Cause CorrectionVSM Group AB SE-561 84 Huskvarna Sweden