ZIPPERS AND PIPING
Set the machine as illustrated. Pattern selector on “A”.
Set stitch length control between “1” - “4” (according to thickness of fabric).
The zipper foot can be snapped onto the right or left of the shank/an- kle, depending on which side of the zipper you are going to sew. (1)
To sew past the zipper pull, lower the needle into the fabric, raise the presser foot and push the zipper pull behind the presser foot. Lower the foot and continue to sew.
It is also possible to sew in a length of cord, into a bias strip to make piping (2).
28