Husqvarna E20 manual Changing the Bulb, Replace bulb with same type rated Watts

Page 9

CHANGING THE BULB

Caution: Make sure to disconnect the electrical supply plug from wall outlet before changing light bulb.

Replace bulb with same type rated:

10 watts (110-120V)

15 watts (220-240V)

-Loosen screw (A) as illustrated. (1)

-Remove the cover (B).

-Unscrew the bulb and put in a new one (C).

(2)

-Replace the cover and tighten screw.

9

Image 9
Contents E20 Important Safety Instructions Contents Principal Parts Page Accessories Slide on the SNAP-IN Accessory BOX For the USA and Canada Connecting the Machine to Power SourceReplace bulb with same type rated Watts Changing the BulbTWO-STEP Presser Foot Lever Adjusting the Presser Foot PressureAttaching the presser foot shank Presser Foot ShankAttaching the presser foot Removing the presser footWinding the Bobbin Inserting the Bobbin Changing the Needle System 130/705H Threading the Upper Thread Bringing UP the Bobbin Thread Upper thread tension Thread TensionRaise or Lower the Feed DOG Changing Sewing Directions Reverse SewingRemoving the Fabric Cutting the ThreadHOW to Choose Your Pattern Needle, fabric, thread selection guide Matching Needle / Fabric / ThreadFunction of stitch width dial ZIG ZAG SewingFunction of stitch length dial while zigzaging Satin stitchStraight Stitching and Needle Position Seams, overcasting, visible hems Overlock StitchesDouble overlock stitch Standard overlockBlind HEM ONE Step Buttonholes Making a ButtonholeMaking a Buttonhole on Stretch Fabrics E Left and Right Side Balance for Buttonhole Zippers and Piping Step ZIG-ZAG Sewing elasticJoining fabric Stretch Stitch Selection Triple straight stitch 1/3Triple zig-zag 2/4 Free Motion Darning Darning Quilting Cleaning the feed dog MaintenanceCleaning and lubricating the hook Remove the stitch plateProblem Cause Correction Troubleshooting GuideVSM Group AB SE-561 84 Huskvarna Sweden