Husqvarna E20 manual Overlock Stitches, Seams, overcasting, visible hems, Double overlock stitch

Page 24

OVERLOCK STITCHES

Seams, overcasting, visible hems.

Turn the stitch length dial to “3’ or “S”.

The stitch width can be adjusted to suit the fabric.

Double overlock stitch:

Set stitch length to S.

For fine knits, handknits, seams. (1)

Standard overlock:

Set stitch length to S.

For fine knits, jerseys, neck edges, ribbing. (2)

Stretch overlock:

Set stitch length to S.

For fine knits, jerseys, neck edges, ribbing. (3)

All overlock stitches are suitable for sewing and finishing/ overcasting edges in one step.

When overcasting, the needle should just go over the edge of the fabric.

Attention: Use new needles or ball point needles or stretch needles!

24

Image 24
Contents E20 Important Safety Instructions Contents Principal Parts Page Accessories Slide on the SNAP-IN Accessory BOX Connecting the Machine to Power Source For the USA and CanadaChanging the Bulb Replace bulb with same type rated WattsAdjusting the Presser Foot Pressure TWO-STEP Presser Foot LeverPresser Foot Shank Attaching the presser foot shankAttaching the presser foot Removing the presser footWinding the Bobbin Inserting the Bobbin Changing the Needle System 130/705H Threading the Upper Thread Bringing UP the Bobbin Thread Thread Tension Upper thread tensionRaise or Lower the Feed DOG Reverse Sewing Changing Sewing DirectionsRemoving the Fabric Cutting the ThreadHOW to Choose Your Pattern Matching Needle / Fabric / Thread Needle, fabric, thread selection guideZIG ZAG Sewing Function of stitch width dialFunction of stitch length dial while zigzaging Satin stitchStraight Stitching and Needle Position Overlock Stitches Seams, overcasting, visible hemsDouble overlock stitch Standard overlockBlind HEM ONE Step Buttonholes Making a ButtonholeMaking a Buttonhole on Stretch Fabrics E Left and Right Side Balance for Buttonhole Zippers and Piping Step ZIG-ZAG Sewing elasticJoining fabric Stretch Stitch Selection Triple straight stitch 1/3Triple zig-zag 2/4 Free Motion Darning Darning Quilting Maintenance Cleaning the feed dogCleaning and lubricating the hook Remove the stitch plateTroubleshooting Guide Problem Cause CorrectionVSM Group AB SE-561 84 Huskvarna Sweden