Husqvarna E20 manual Darning

Page 32

DARNING

-Turn stitch length dial to the desired length.

-Turn stitch selector to straight stitch, center needle position.

-Position the fabric to be darned under the presser foot with the underlay fabric.

-Lower the presser foot and alternately sew forward and reverse using the reverse lever.

-Repeat this motion until the area to be darned is ﬁlled with rows of stitching.

32

Image 32

Contents E20 Important Safety Instructions Contents Principal Parts Page Accessories Slide on the SNAP-IN Accessory BOX Connecting the Machine to Power Source For the USA and CanadaChanging the Bulb Replace bulb with same type rated WattsAdjusting the Presser Foot Pressure TWO-STEP Presser Foot LeverPresser Foot Shank Attaching the presser foot shankAttaching the presser foot Removing the presser footWinding the Bobbin Inserting the Bobbin Changing the Needle System 130/705H Threading the Upper Thread Bringing UP the Bobbin Thread Thread Tension Upper thread tensionRaise or Lower the Feed DOG Reverse Sewing Changing Sewing DirectionsRemoving the Fabric Cutting the ThreadHOW to Choose Your Pattern Matching Needle / Fabric / Thread Needle, fabric, thread selection guideZIG ZAG Sewing Function of stitch width dialFunction of stitch length dial while zigzaging Satin stitchStraight Stitching and Needle Position Overlock Stitches Seams, overcasting, visible hemsDouble overlock stitch Standard overlockBlind HEM Making a Buttonhole on Stretch Fabrics E ONE Step ButtonholesMaking a Buttonhole Left and Right Side Balance for Buttonhole Zippers and Piping Joining fabric Step ZIG-ZAGSewing elastic Triple zig-zag 2/4 Stretch Stitch SelectionTriple straight stitch 1/3 Free Motion Darning Darning Quilting Maintenance Cleaning the feed dogCleaning and lubricating the hook Remove the stitch plateTroubleshooting Guide Problem Cause CorrectionVSM Group AB SE-561 84 Huskvarna Sweden