REVERSE SEWING
Reverse sewing is used for locking the end of seams and where reinforcement is needed. At the end of seam, press down the reverse sewing lever and touch the foot control lightly. Sew a few reverse stitches. Release the lever and the machine will sew forward again (A).
CHANGING SEWING DIRECTIONS
1.Stop the machine at the point where you wish to change directions with the needle in the fabric.
2.Raise the presser foot and turn the fabric using the needle as a turning point.
3.Lower the presser foot and start sewing in the new direction.
REMOVING THE FABRIC
Turn the handwheel towards you to bring the thread take up lever to its highest position. Raise the presser foot and draw the fabric away from you.
CUTTING THE THREAD
Hold the threads behind the presser foot. Using both hands, guide them to the slit at the rear of the presser bar and press down to cut the thread. You can also use the thread cutter on the side of the machine (B).
19