Kompernass E-2073 manual Changing the sew foot, Changing the stitch plate

Page 13

b)Changing the sew foot

First raise the needle fully, by turning the handwheel.

Loosen the foot screw and take off the sew foot together with the foot holder.

Press the lever on the foot holder. The sew foot can now be separated from the holder.

Place the selected sew foot on the holder, for example the

buttonhole foot

blind hem foot

button foot

zipper foot

and press the lever again till the sew foot engages in the holder.

Place the sew foot and holder back on the guide rod and tighten the foot screw again.

c)Changing the stitch plate

The zigzag stitch plate is mounted on the machine at the factory, and can be used for most straight stitches, zigzag stitch work, and decorative stitches. However, if you wish to use the darning plate supplied:

First raise the needle fully, by turning the handwheel.

Simply lay the darning plate on top of the zigzag plate, so that the flat guide pins are inserted in the slots in the zigzag plate.

•If you no longer need the darning plate, simply take it off again.

13

Image 13

Contents Page Automatic Free-Arm Sewing Machine 270 E Technical Data ContentsContent of package Intended UseProvide adequate lighting when working Switching On / Off Setting upThreading Threading the lower thread Under the tension spring Close the gripper flap Then over the threading hook Threading the upper threadRetrieving the lower thread Threading with 2 needles Attaching accessoriesChanging needles Changing the stitch plate Changing the sew footButtonhole foot Blind hem foot Button foot Zipper foot Setting the upper thread tension SettingsSetting the lower thread tension Stitch width Setting the presser foot pressureStitch length Open the front coverTo place the material SewingTo start a seam To finish off a seamChanging the sewing direction Guiding the materialStraight stitch Selecting a stitch patternZigzag Set the stitch length Select the stitch widthSewing stitch pattern selector & sewing table accoutrements Blind hem Please refer to the details for the various materials Material-Thread-Needle-TableOvercast stitch Seam guideStretch seam Attach the button hole foot, as described in Chapter Sewing buttonholesEdge-to-edge stitching Sewing on buttonsSewing a zipper Embroidery Sewing with the twin needleThread cutter Clean the feeder Clean the gripper areaCare Open the gripper coverOil the gripper track Clean the casingWhat else needs oiling? StoringFault / Problem Check Possible remedy Is there a problem?Disposal Warranty and serviceIf the bulb no longer comes on