Kompernass E-2073 manual Close the gripper flap

Page 9

Place the bobbin case on the pin

Turn the bobbin case until the feed dog engages in the recess.

•Place the excess thread so that it does not catch anywhere

•Close the gripper flap.

The box compartment can now be simply pushed back in, for example if you need it as an 'extension flap' for sewing larger areas of material. However, you can also leave the box detached, for example forfree-arm sewing on sleeves, trouser legs, etc.

Image 9

Contents Page Automatic Free-Arm Sewing Machine 270 E Technical Data ContentsContent of package Intended UseProvide adequate lighting when working Switching On / Off Setting up Threading Threading the lower thread Under the tension spring Close the gripper flap Then over the threading hook Threading the upper threadRetrieving the lower thread Attaching accessories Threading with 2 needlesChanging needles Changing the sew foot Changing the stitch plateButtonhole foot Blind hem foot Button foot Zipper foot Settings Setting the upper thread tensionSetting the lower thread tension Stitch width Setting the presser foot pressureStitch length Open the front coverTo place the material SewingTo start a seam To finish off a seamChanging the sewing direction Guiding the materialStraight stitch Selecting a stitch patternZigzag Set the stitch length Select the stitch widthSewing stitch pattern selector & sewing table accoutrements Blind hem Please refer to the details for the various materials Material-Thread-Needle-TableSeam guide Overcast stitchStretch seam Attach the button hole foot, as described in Chapter Sewing buttonholesEdge-to-edge stitching Sewing on buttonsSewing a zipper Sewing with the twin needle EmbroideryThread cutter Clean the feeder Clean the gripper areaCare Open the gripper coverOil the gripper track Clean the casingWhat else needs oiling? StoringFault / Problem Check Possible remedy Is there a problem?Warranty and service DisposalIf the bulb no longer comes on