Kompernass E-2073 manual Sewing with the twin needle, Embroidery, Thread cutter

Page 26

q)Sewing with the twin needle

Insert the new needle, with the flat end towards the rear.

•Pass the thread in, as for normal sewing. The two threads are passed together through the thread guides – as far as the twin needle.

•It is here that the two upper threads are threaded separately.

•Make sure that the stitch width set- ting is no larger than "3" – otherwise the needle will break.

r)Embroidery

• Take off the sew foot

Place the darning plate on top of the zigzag plate, as described in Chapter 8.

Embroidery can only be done free- hand. The material should be clamped in the tambour and moved around the motif as required, while you control the speed of the needle movements with the foot switch.

s)Thread cutter

When you have completed a seam, or if you wish to cut the threads for any other reason:

Simply pull the threads over the sharp blade behind the sew foot to cut the threads off.

26

Image 26

Contents Page Automatic Free-Arm Sewing Machine 270 E Content of package ContentsTechnical Data Intended UseProvide adequate lighting when working Setting up Switching On / OffThreading Threading the lower thread Under the tension spring Close the gripper flap Threading the upper thread Then over the threading hookRetrieving the lower thread Changing needles Attaching accessoriesThreading with 2 needles Buttonhole foot Blind hem foot Button foot Zipper foot Changing the sew footChanging the stitch plate Setting the lower thread tension SettingsSetting the upper thread tension Stitch length Setting the presser foot pressureStitch width Open the front coverTo start a seam SewingTo place the material To finish off a seamGuiding the material Changing the sewing directionZigzag Selecting a stitch patternStraight stitch Set the stitch length Select the stitch widthSewing stitch pattern selector & sewing table accoutrements Blind hem Material-Thread-Needle-Table Please refer to the details for the various materialsStretch seam Seam guideOvercast stitch Sewing buttonholes Attach the button hole foot, as described in ChapterSewing on buttons Edge-to-edge stitchingSewing a zipper Thread cutter Sewing with the twin needleEmbroidery Care Clean the gripper areaClean the feeder Open the gripper coverWhat else needs oiling? Clean the casingOil the gripper track StoringIs there a problem? Fault / Problem Check Possible remedyIf the bulb no longer comes on Warranty and serviceDisposal