Kompernass E-2073 manual Selecting a stitch pattern, Straight stitch, Zigzag

Page 18

f)Selecting a stitch pattern

To select a particular pattern, take the following steps:

Select Stitch program on the pro- gramme selector.

Set the stitch length.

Select the stitch width.

Attach the corresponding sew foot, as described in Chapter 8.

Make the required settings as shown in the table on the right. If two values are set for the stitch length, these are understood as "from ... to ..." values.

g)Straight stitch

This is the most frequently used type of stitch. The zigzag sew foot is used for both straight and zigzag stitches. A smaller size of stitch should be selected for sewing finer materials.

h)Zigzag

The zigzag stitch is universal. The satin stitch pattern consists of short stitches set closely to each other, and is suitable for sewing initials, figures, appliqué, etc..

Image 18

Contents Page Automatic Free-Arm Sewing Machine 270 E Content of package ContentsTechnical Data Intended UseProvide adequate lighting when working Setting up Switching On / OffThreading Threading the lower thread Under the tension spring Close the gripper flap Threading the upper thread Then over the threading hookRetrieving the lower thread Attaching accessories Threading with 2 needlesChanging needles Changing the sew foot Changing the stitch plateButtonhole foot Blind hem foot Button foot Zipper foot Settings Setting the upper thread tensionSetting the lower thread tension Stitch length Setting the presser foot pressure Stitch width Open the front coverTo start a seam SewingTo place the material To finish off a seamGuiding the material Changing the sewing directionZigzag Selecting a stitch patternStraight stitch Set the stitch length Select the stitch widthSewing stitch pattern selector & sewing table accoutrements Blind hem Material-Thread-Needle-Table Please refer to the details for the various materialsSeam guide Overcast stitchStretch seam Sewing buttonholes Attach the button hole foot, as described in ChapterSewing on buttons Edge-to-edge stitchingSewing a zipper Sewing with the twin needle EmbroideryThread cutter Care Clean the gripper areaClean the feeder Open the gripper coverWhat else needs oiling? Clean the casingOil the gripper track StoringIs there a problem? Fault / Problem Check Possible remedyWarranty and service DisposalIf the bulb no longer comes on