Kompernass E-2073 manual Threading the lower thread

Page 7

b)Threading the lower thread

First raise the needle fully, by turning the handwheel.

Pull out the box compartment to the side, as shown.

Open the gripper flap located behind.

Fold out the lever arm from the bobbin case.

Take out the bobbin case as shown.

7

Image 7

Contents Page Automatic Free-Arm Sewing Machine 270 E Intended Use ContentsTechnical Data Content of package Provide adequate lighting when working Switching On / Off Setting upThreading Threading the lower thread Under the tension spring Close the gripper flap Then over the threading hook Threading the upper threadRetrieving the lower thread Threading with 2 needles Attaching accessoriesChanging needles Changing the stitch plate Changing the sew footButtonhole foot Blind hem foot Button foot Zipper foot Setting the upper thread tension SettingsSetting the lower thread tension Open the front cover Setting the presser foot pressureStitch width Stitch lengthTo finish off a seam SewingTo place the material To start a seamChanging the sewing direction Guiding the materialSet the stitch length Select the stitch width Selecting a stitch patternStraight stitch ZigzagSewing stitch pattern selector & sewing table accoutrements Blind hem Please refer to the details for the various materials Material-Thread-Needle-TableOvercast stitch Seam guideStretch seam Attach the button hole foot, as described in Chapter Sewing buttonholesEdge-to-edge stitching Sewing on buttonsSewing a zipper Embroidery Sewing with the twin needleThread cutter Open the gripper cover Clean the gripper areaClean the feeder CareStoring Clean the casingOil the gripper track What else needs oiling?Fault / Problem Check Possible remedy Is there a problem?Disposal Warranty and serviceIf the bulb no longer comes on