ENGLISH
Get started
The headset contains the following parts shown on the title page: 3.5 mm audio connector (1) for headphones, microphone (2), power key (3), indicator light (4), answer/end key (5), rewind key (6), play/pause key (7), forward key (8), clip (9), charger connector (10), volume up key (11), and volume down key (12).
Before using the headset, you must charge the battery and pair the headset with a compatible device.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.
Charge the battery
Before charging the battery, carefully read “Battery and charger information”.
Warning: Use only chargers approved by Nokia for use with this particular model.
The use of any other types may invalidate any approval or warranty, and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
1.Connect the charger to a wall outlet.
2.Connect the charger cable to the charger connector (14). The red indicator light is displayed during charging. Charging the battery fully may take up to 2 hours.