ENGLISH
3. When the battery is fully charged, | Switch on or off | |
the green indicator light is | To switch on, press and hold the power | |
displayed. Disconnect the charger | ||
key for about 2 seconds. The headset | ||
from the headset, then from the | ||
beeps, and the green indicator light | ||
wall outlet. | ||
is displayed. The headset tries to | ||
The fully charged battery has power | ||
connect to the last connected | ||
for up to 8 hours of talk time, up to | mobile device. | |
300 hours of standby time, or up to | To switch off, press and hold the | |
7 hours of music playing time. | ||
power key for about 5 seconds. The | ||
To check the battery charge when the | ||
headset beeps, and the red indicator | ||
headset is not connected to a charger, | light is briefly displayed. If the headset | |
press the answer/end key when the | is not connected to a device within | |
headset is switched on and no call is | about 30 minutes, it switches off | |
in progress. If the indicator light is | automatically. | |
green, the charge level is sufficient. | Pair and connect the headset | |
If the light is yellow, you may need to | ||
recharge the battery soon. If the light | Before using the headset, you must | |
is red, recharge the battery. | pair and connect it with a compatible | |
When the battery charge is low, the | device. | |
| ||
headset beeps every 5 minutes and | If your mobile device supports the | |
the red indicator light flashes. | A2DP Bluetooth profile and has a | |
| music player feature, you can use the |