Hoover U5432900 manual Transporting cleaner, Carrying cleaner, Handle positions

2-3

Transporting cleaner

To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.

2-4

Carrying cleaner

The cleaner can also be moved by using the carrying handle.

2-5

Handle positions

The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle.

2-6
B	A
Carpet height
adjustment

The cleaning of carpet and rugs takes place at the nozzle (A).

When it is necessary to raise and lower the nozzle for various carpet pile heights, slide the nozzle control knob (B) to the desired setting.

2-7	C
	D

Handle position

For ease in sliding knob, the handle should be in the upright position (C).

The nozzle will not move into the adjusted position until the cleaner handle is lowered to the operating position (D).

2-8

BARE

HIGHFLOOR

Settings

For maximum cleaning performance, the following carpet height settings are recommended:

• Lowest setting: for all types of carpet

Note: If the cleaner is difficult to push, slide knob to the next higher setting.

•Higher settings: for very deep pile carpet where easier pushing effort is desired, while maintaining good cleaning performance.

6