HOSE: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.15To remove Hose for tool use, press the Hose Release Button (A) and pull Hose end out.
Clear away debris or obstructions from Hose. Do not use sharp objects to clean out hose as they can cause damage. To lock back into place, push Hose into Hose Tube until you hear a click.
4.15 |
A |
Powered Hand Tool: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.16Turn tool so bottom faces up. Rotate the latches (A) on either side of tool.
4.17Remove bottom plate (B).
4.18Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front edge of tool. Rotate latches back into locked position.
4.16 A
4.17 B
4.18 |
11