BM 1609929K45
Operating Instructions
FIG. 5
The vacuum cleaner has four operating modes:
•Normal Vacuuming Mode
•Power Tool Activation Mode
•
•
!WARNING Avoid accidental starting. Be sure vacuum and tool
switches are OFF before plugging in or putting vacuum switch into power tool activation mode or filter cleaning mode. Do not keep power tool plugged into the vacuum cleaner’s power tool outlet during normal vacuuming. Plugging in vacuums or tools that have the switch ON invites accidents.
Not suitable to vacuum ! WARNING hazardous or toxic
substances or dusts e.g. asbestos. Neither the standard VAC012 Filter Cartridges or the optional VAC019 HEPA Filter Cartridges are able to capture all particles and may exhaust them back into the environment.
NORMAL VACUUMING MODE
Switching the Unit On: Set mode selector
switch to ON.
Switching the Unit Off: Set mode selector switch to OFF.
POWER TOOL ACTIVATION MODE
In the
POWER BROKER
POWER ALLOCATION FEATURE The Power Broker feature allows optimal allocation of the power available between the vacuum cleaner and power tool on either 15- Amp or
Before connecting power tool, set POWER BROKER™ dial as follows:
1.Get tool amp rating from tool dataplate
2.Subtract tool amp rating from building circuit’s amp rating
3.Set dial to the difference.
Notes:
•The building's circuit breaker can trip if the combination of power tool amp rating and the dial setting exceed the building circuit's amp rating.
•The dial should be set at 11 amps unless the building circuit's amp rating minus the power tool amp rating setting is less than 11 amps.